A
Amy LewisSep 12, 2025
What does 'CLOSE THE SPF/RSPF COVER' mean on Sharp AR-M201?
- LLisa WilsonSep 12, 2025
If your Sharp Copier displays 'CLOSE THE SPF/ RSPF COVER', it means the document feeder cover is open. Close the document feeder cover.
To Next PageTo Next PageWhat does 'CLOSE THE SPF/RSPF COVER' mean on Sharp AR-M201?
If your Sharp Copier displays 'CLOSE THE SPF/ RSPF COVER', it means the document feeder cover is open. Close the document feeder cover.
What to do if my Sharp AR-M201 Copier is not printing due to paper size?
If your Sharp Copier isn't printing and you suspect it's related to paper size, there are a few things to check: * First, make sure that the size of paper loaded in the tray and the machine's paper size setting agree. * Second, if the specified size of paper has not been loaded, load the specified size of paper in the paper tray. * Finally, when "FORCED OUTPUT" is set to "OFF" and there is no paper in the machine that is the same size as the print image, load paper in the bypass tray as instructed by the message in the display and press the [START] key to begin printing.
What does 'TONER CARTRIDGE IS NEAR EMPTY' mean on Sharp Copier?
If your Sharp Copier displays 'TONER CARTRIDGE IS NEAR EMPTY', it means that you should prepare a new cartridge.
What to do if Sharp Copier does not print because of a copy job?
If your Sharp Copier is not printing, it may be because a copy job is currently in progress. Wait until the copy job is finished before attempting to print.
Why my Sharp Copier does not operate?
If your Sharp Copier is not operating, consider the following possibilities: 1. Ensure the machine is plugged into a grounded outlet. 2. Check that the power switch is turned ON. 3. If the power save indicator is blinking, allow the machine to finish warming up. 4. Make sure the front cover or the side cover is completely closed. 5. If the machine is in auto power shut-off mode (only the power save indicator is lit), press the [START] key to resume normal operation.
What to do if Sharp Copier says 'FRONT OR SIDE COVER OPEN'?
If your Sharp Copier displays 'FRONT OR SIDE COVER OPEN. CLOSE COVERS', it means the cover is open. Ensure that you close the cover.
Why wrinkles appear in the paper of Sharp Copier?
If wrinkles appear in the paper, or the image disappears in places when using your Sharp Copier, the paper may be outside of the specified size and weight range. Use copy paper within the specified range.
What to do if Sharp AR-M201 Copier will not function?
To solve the issue where your Sharp Copier will not function, turn the power switch off, wait about 10 seconds, and then turn it on again.
How to fix 'NO PC COMMUNICATION' error on Sharp Copier?
If your Sharp Copier displays 'NO PC COMMUNICATION; CHECK CABLE', it means the machine isn't correctly connected to the computer. Check the cable connection, especially when using the scanner function.
Why is the image cut off on Sharp AR-M201 Copier?
If the image is cut off or there's too much blank space when using your Sharp Copier, consider these solutions: 1. Ensure the original is placed correctly. 2. Adjust the ratio using the [COPY RATIO] key to suit the original and paper sizes. 3. If you changed the paper size in the tray, remember to update the tray's paper size setting accordingly.
Details the configurations and descriptions of various functions provided by the copier models.
Outlines fundamental physical and dimensional details of the copier models.
Details the specifications related to operational aspects like paper feed, scanning, and image forming.
Lists consumable items like toner cartridges, developers, and drum kits with their product names and packing forms.
Provides visual representations and labeling of the external components of the copier.
Illustrates the internal layout and identifies key internal parts and mechanisms of the copier.
Guides on proper placement and environmental considerations for installing the copier unit.
Provides essential safety warnings and precautions to be observed when handling the copier.
Details the procedure for verifying that all expected components and accessories are present upon unpacking.
Presents a visual representation of the internal workflow and processes involved in copying.
Provides a basic overview of the copier's operational flow, covering copy, printer, and scanner functions.
Details the components and working principles of the copier's scanner unit, including optical and drive systems.
Details the procedures for disassembling and assembling the high voltage components for service.
Covers adjustments related to the optical system, including magnification ratio and image position.
Explains how to access the simulation mode for diagnostics and adjustments.
Lists maintenance tasks, parts, and their required actions (check, clean, adjust, lubricate) based on usage intervals.
Outlines various functions and parameters that can be customized by users through the program settings.
Presents the overall electrical architecture and component interconnections of the system.
Details the initial setup required on the PC, including serial number assignment, before firmware download.
General
