To Next Page
R
Russell GeorgeJul 30, 2025
Why does my Sharp AR-287 produce copies with dust, dirt, or smudges?
- PphernandezJul 30, 2025
The document glass or RADF transport belt may be dirty. Clean these components regularly.
Why does my Sharp AR-287 produce copies with dust, dirt, or smudges?
The document glass or RADF transport belt may be dirty. Clean these components regularly.
Why does the Sharp Copier display “THE SYSTEM IS NOT CONFIGURED TO PERFORM TANDEM JOB. CODE: XX” and tandem copying fails?
Tandem copying will not work unless the same optional equipment is installed on both the main and sub copiers. Also, ensure that the settings for 'Disabling of Duplex Copying,' 'Disabling of Stapler,' and 'Disabling of Bypass-Tray When Offset Tray Selected' are identical on both copiers.
What to do if the Sharp AR-287 displays “CHECK T HE SU B MACHINE.” and tandem copying won't start?
If a message appears on the touch panel of the sub copier, follow the instructions provided in that message to resolve the problem. This should allow tandem copying to start.
How to adjust Sharp AR-287 touch panel if it's too dark or too light?
This is likely due to the LCD contrast not being properly adjusted. You can adjust the LCD contrast using the instructions on page 6-7.
Explains how to effectively use the operation guide for optimal results.
Details site preparation and environmental needs for copier installation.
Lists important safety warnings and precautions for operating the copier.
Describes the procedure for turning the copier on and off.
Explains how to access help and information on copier features.
Guides users on interacting with the copier's touch screen interface.
Explains the copier's power saving features.
Details the basic operation and interaction with the touch screen.
Explains how to select and register copier functions via the touch panel.
Describes how to use the copier's account tracking feature.
Explains how to use the Reversing Automatic Document Feeder.
Guides on copying originals placed directly on the glass.
Details how to adjust copy size using reduction, enlargement, or zoom.
Instructions for using special paper types via the bypass tray.
How to adjust the brightness and contrast of copies.
Explains how to collate or group copies into sets.
How to store and recall frequently used copy settings.
Procedure for temporarily stopping a copy job.
Information on the automatic feeding mode for continuous originals.
Describes automatic adjustment of copy size based on paper and original.
Default exposure setting that reads original characteristics.
Different exposure modes for various original types.
Copies are collated by sets and delivered sequentially.
All copies of the same original are grouped together.
Copies are collated and automatically stapled.
Explains how to save copy settings for later recall.
Procedure for removing saved job programs from memory.
How to retrieve and use previously saved copy settings.
Allows independent adjustment of horizontal and vertical copy ratios.
Shifts the image position to create a binding margin.
Eliminates unwanted shadow lines from edges or bindings.
Copies two pages side-by-side onto a single sheet.
Arranges multiple originals onto a single copy sheet.
Adds cover pages to the front, back, or both sides of documents.
Copies onto transparency film with optional insert sheets.
Arranges copies for booklet creation, suitable for center-stapling.
A group of functions for enhancing and manipulating images.
Adds text or date stamps to copies.
Enables copying using two copiers connected together.
Displays the current settings of various copier functions.
Eliminates shadow lines around the edges of copies.
Removes shadow lines caused by document bindings.
Combines edge and center erase functions for shadow removal.
Copies multipage documents up to 120 pages using the document feeder.
Shifts image to center copy paper when sizes differ.
Produces repeated images of an original on one sheet.
Reverses black and white areas of the image.
Rotates second-side image for left-side binding.
Adds the current date to copies at the upper right.
Adds predefined stamps like 'Confidential' or 'Urgent' to copies.
Adds watermarks in gray tone to copies.
Adds sequential page numbers to copies.
Information on copy paper types, sizes, and loading.
Step-by-step guide for replacing the toner cartridge.
Instructions for safely disposing of used toner containers.
Recommendations for storing paper and other supplies.
Lists available paper sizes and their specifications.
Instructions for loading paper into the copier trays.
Guidance on storing supplies in suitable conditions.
Step-by-step instructions for clearing paper jams.
What to do when the copier indicates maintenance is needed.
A guide to identifying and resolving common copier problems.
Identifies and explains the various parts of the copier.
Routine cleaning and care procedures for the user.
How to adjust the brightness and contrast of the touch screen.
Technical details and performance specifications of the copier.
Identifies external components and their functions.
Identifies internal components and their functions.
Details the keys and indicators on the copier's control panel.
Instructions for cleaning the document glass and cover.
Technical specifications for the copier unit itself.
Specifications related to the duplex copying feature.
Specifications for the automatic document feeder.
Overview of available optional equipment for the copier.
Details for the AR-FN1N finisher, including parts and functions.
Details for the AR-FN2 finisher, including parts and functions.
Information on the AR-LC1N large capacity paper tray.
Details for the AR-DE1N stand with a paper drawer.
Information on the AR-TR1 dual tray output unit.
Identifies the components of the AR-FN1N finisher.
Technical specifications for the AR-FN1N finisher.
How copies are stacked with or without offset.
Explains sorting, grouping, and stapling of copies.
Details on stapling copies using the RADF.
Instructions for replacing the staple cartridge in the finisher.
Procedures for clearing jammed staples from the finisher.
Procedures for clearing paper jams within the finisher.
Identifies the components of the AR-FN2 finisher.
Technical specifications for the AR-FN2 finisher.
How copies are stacked with or without offset in the AR-FN2 finisher.
Explains sorting, grouping, and stapling of copies with the AR-FN2.
Details on stapling copies using the RADF with the AR-FN2.
Instructions for replacing the staple cartridge in the finisher.
Procedures for clearing jammed staples from the finisher.
Procedures for clearing paper jams within the AR-FN2 finisher.
Identifies the components of the large capacity tray.
Technical specifications for the large capacity tray.
Instructions for loading paper into the large capacity tray.
Procedures for clearing paper jams in the large capacity tray.
Identifies the components of the stand and paper drawer.
Technical specifications for the stand/paper drawer.
Instructions for loading paper into the stand's paper drawer.
Procedures for clearing paper jams in the stand's paper drawer.
Identifies the components of the dual tray output unit.
Technical specifications for the dual tray output unit.
General
