How to remove dust and smudges from Sharp Copier copies?
If you notice dust, dirt, or smudges appearing on copies from your Sharp Copier, the original table or original cover might be dirty. Clean them regularly.
Why are my Sharp Copier copies too dark or light?
If your Sharp Copier produces copies that are too dark or too light, first check if the original image itself is too dark or light and adjust the exposure manually. If the unit is in automatic exposure mode, adjust the automatic exposure level. Also, if the unit is in photo exposure mode, cancel it.
What to do if my Sharp AR-5415 Copier paper misfeeds frequently?
If your Sharp Copier is misfeeding paper frequently, ensure you are using standard paper. If you are using special papers, feed them through the single bypass. Make sure the paper isn't curled or damp; store it flat in its wrapper in a dry location. Remove any pieces of misfed paper from inside the unit. Check that the paper guides in the paper tray are set properly for the paper size, and remove excessive paper from the tray.
Why do images rub off easily from Sharp AR-5415 copies?
If images rub off the copy easily on your Sharp Copier, it might be due to the paper being too heavy. Use paper within the specified range. Also, check if the paper is damp; replace it with dry paper. If the unit is not used for a long time, remove the paper from the paper tray and store it in its wrapper in a dry location.
How to troubleshoot a Sharp AR-5415 Copier that does not operate?
If your Sharp Copier unit does not operate, first ensure it is plugged into a grounded outlet and that the power switch is turned on. Also, check that the side cover and front cover are closed securely. Close the front cover first, and then the side cover.
Sharp AR-5415 подключается к пк
Details CLASS 1 LASER PRODUCT information and critical safety precautions for laser use.
Detailed description of all buttons, indicators, and the display on the operation panel.
Details recommended paper types, sizes, and weights for tray and bypass feeding.
Step-by-step instructions for correctly inserting paper into the paper tray.
Instructions for using the single bypass with special papers and general feeding.
Outlines the sequence of operations for completing a copying task.
Instructions for positioning originals on the original table for optimal copying.
Details on setting the number of copies and adjusting exposure levels.
Guide to using zoom functions and preset ratios for size adjustments.
Step-by-step instructions for replacing the toner cartridge.
Procedure to check the remaining toner quantity and its percentage.
A comprehensive table of common problems, causes, and solutions.
Explains the meaning of unit indicators and alphanumeric codes for problem diagnosis.
Instructions for identifying and removing paper misfeeds from various unit locations.
General| Printing Technology | Laser |
|---|---|
| Copy Speed | 15 ppm |
| Resolution | 600 x 600 dpi |
| Paper Capacity | 250 sheets |
| Max. Paper Capacity | 500 sheets |
| Maximum Paper Size | A4 |
| Weight | 33.4 kg |
| Copy Magnification | 50% - 200% |
| Reduction/Enlargement | 50 - 200% |
| Supported Paper Size | A4, A5, Legal, Letter, B5 |
| Type | Digital Copier |
To Next Page
