To Next PageTo Next Page
Need help?Do you have a question about the Sharp AR-5132 and is the answer not in the manual?
Overview of various digital copying functions, including zooming, edge erase, and binding margin.
Description of optional components like sorters and printer kits.
Details on copier type, copy system, scanning system, and scanning resolution.
Lists consumable parts for different regions (SEC, Europe, SCA).
Specifications for the 20-bin sorter SF-S15.
Specifications for the staple sorter SF-S53N.
Identification and function of external parts of the copier.
Identification and function of internal components of the copier.
Details and functions of the copier's operation panel.
Diagrams and labels for major internal parts of the copier.
Diagrams and labels for various sensors within the copier.
Identification and function of clutches and solenoids.
Identification and function of various motors used in the copier.
Identification of various Printed Wiring Boards (PWBs) and their functions.
Identification and function of components within the duplex copy tray.
Diagrams and labels for major parts of the desk unit.
Diagrams and labels for sensors within the desk unit.
Diagrams and labels for RADF sensors.
Identification and function of RADF motors.
Identification and function of RADF clutches and solenoids.
Identification of RADF Printed Wiring Boards (PWBs).
Guidelines for selecting a suitable environment for installing the copier.
Step-by-step instructions for unpacking the copier and desk unit.
Instructions for installing the desk unit, fusing unit, RADF, and other components.
Procedures for adjusting drum marking sensor and process control sensor outputs.
Procedures for shading correction and setting the test chart.
Steps for disassembling and reassembling the process unit, including OPC drum and cleaning plate.
Steps for disassembling and reassembling the manual feed copy unit.
Steps for disassembling and reassembling the paper feed unit components.
Steps for disassembling and reassembling the transport base unit.
Steps for disassembling and reassembling the fusing unit, including heat rollers.
Steps for disassembling and reassembling the auto duplex unit.
Identification of main components located at the rear frame of the copier.
Steps for disassembling the operation panel and document size sensor.
Steps for disassembling the optical unit, including copy lamp and mirrors.
Steps for disassembling the LSU (Laser Scanner Unit).
Steps for disassembling Printed Wiring Boards (PWBs).
Steps for disassembling the RADF (Reversing Automatic Document Feeder).
Adjustments for the developing section, including doctor clearance and bias voltage.
Adjustments for the process section, including high voltage output and charger current.
Procedures for checking laser unit printing and adjusting distortion.
Adjustments for optical section magnification and distortion.
Adjustments for document detection arm and level.
Adjustments for printing off-center and document off-center.
Adjustments for center misalignment in paper trays 1 and 2.
Adjustments for center misalignment in paper tray 3.
Adjustments for ADU matching guide and center misalignment.
Adjustments for RADF center misalignment and document lead edge position.
Procedures for entering and exiting simulation modes.
Explanation of the main code input screen for simulations.
Explanation of the sub code input screen for simulations.
Description of the simulation execution display.
Procedure for activating settings within simulations.
Handling of errors and exceptions during simulation execution.
A list of available simulation codes and their functions.
Table detailing maintenance items, parts, and replacement intervals.
Procedure for replacing the ozone filter.
Diagrams indicating points for oiling and greasing.
Additional maintenance items and intervals based on operating conditions.
General
