4 Remove the AC and DC power supply PWB.
(5) Paper exit gate solenoid
1 Remove the rear cabinet from the machine.
2 Remove the right-side screws of the left cabinet.
3 Remove the fusing drawer unit.
4 Remove the paper exit gate solenoid.
8. Operation panel unit/Document size
sensor PWB (light reception side)
(1) Operation panel
1 Open the front cabinet of the machine and remove the middle
cabinet.
2 Remove the screws securing the glass holding plate at its front
right and left.
3 Remove the screws securing the magnet catch plate.
4 Remove the operation panel unit.
AC power supply
DC power supply
Paper exit
gate solenoid
Middle cabinet
Operation
panel unit
Screw
7 – 10
To Next Page
Loading...
