Sharp AR-5132

(2) Document size sensor PWB (light reception
side)
1 Remove the operation panel unit.
2 Remove the Document size sensor PWB.
(3) LCD unit
1 Remove the LCD control PWB from the operation panel unit.
2 Remove the angle securing the LCD control PWB, from the opera-
tion panel unit.
3 Remove the control PWB from the operation panel unit.
4 Remove the LCD unit.
9. Optical unit
(1) Copy lamp unit
1 Remove the right and left document guides and table glass.
2 Remove the dark box cover.
3 Remove the wire fixing plates at the front and rear frames of the
copy lamp unit. Remove the side plates (front and rear).
4 Remove the copy lamp unit by twisting it.
Document size
sensor PWB
B
B
LCD unit
Table glass
Dark box cover
Remove
plate
securing
wire
Remove plate
securing wire
Copy lamp unit
F R
7 – 11