[2] SPECIFICATIONS
1. Basic specifications
(1) Type: Console
(The desk is standard equipment, but packaged
separately.)
(2) Copy system: Static electricity transfer, dry
copier
(3) Scanning system
Miniature optical, CCD linear sensor
Linear sequential scanning by light source
shifting
Basic scanning resolution: 400 dpi
(4) Copy speed
Paper size Normal Enlargement Reduction
Letter 32 17 23
W-letter 17 16 17
Legal 19 17 19
Letter-R 23 17 21
Invoice 32 17 23
Paper size Normal Enlargement Reduction
A4 32 17 23
A3 17 16 17
B4 19 17 19
A4R 23 17 21
A5 32 17 23
(5) First copy time
4.6 seconds When a sheet of A4 or letter size paper is fed
from the paper tray 1
ADU No data ADU standard equipment
Paper tray 1 4.6 sec
Paper tray 2 5.3 sec
Paper tray 3 5.5 sec LCC
(6) Document
Max. document size 437 × 301 mm
(same for both AB/Inch systems)
Document positioning
reference point
Left center (when OC is used.)
(7) Paper feed
Paper feed port 500 sheets cassette × 2
3000 sheets cassette (LCC type)
Manual feed tray
Tray size (factory setting)
ADU ADU Standard
Paper tray 1 A3/W-letter Supplied as accessory
Paper tray 2 A4R/Legal
Paper tray 3 A4/Letter
1 Manual feed tray
Tray type Folding type (2-stage telescopic)
Copy paper size A3 ∼ A6R
W letter size ∼ invoice form
Detectable paper size A3, B4, A4, A4R, A5
W-letter, Legal, Letter, Letter-R, Invoice
Feedable paper size Single feed: 56 ∼ 128 g/m
2
Multi feed: 56 ∼ 80 g/m
2
(50 sheets)
(A4/Letter size or smaller when paper
weight is more than 104 g/m
2
)
Special type of paper OHP with backing paper (backing paper is
removed when set), label paper, recycled
paper, blueprint paper, index paper
2 Paper tray 1/paper tray 2
Cassette type Paper tray 1: Inner type
Paper tray 2: Integral with drawer
Copy paper size A3 ∼ A5 (A5R is available only for inner type)
W letter size ∼ Invoice form
(Invoice form is available only for inner type)
Size change To be performed only by service person
• Changing regulating plate mounting position
• Moving size detection block
• Changing size display
Feedable paper size 56 ∼ 80 g/m
2
(including recycled paper)
Capacity 500 sheets (total thickness: less than 54 mm)
3 Paper tray 3
Cassette type LCC (Large capacity cassette) type
Copy paper size A4
Letter
Size change To be performed only by service person
• Changing regulating plate mounting position
• Moving size detection block
• Changing size display
Feedable paper size 56 ∼ 80 g/m
2
(including recycled paper)
Capacity 3000 sheets (1500 sheets for each stage)
Total thickness: less than 165 mm (Thickness
of 1500 sheets)
(8) Job speed
S → S 32 sheets/min (10 documents and 1 copy per document)
Conditions: with duplex unit and without stapler
Excluding first copy.
S → D 20 surfaces/min (10 documents and 5 copies per
document)
D → D 20 surfaces/min (5 documents and 5 copies per
document)
D → S 25 surfaces/min (5 documents and 5 copies per
document)
(9) Multi copy mode
Maximum setting 999 copies
(10) Warm-up time
Power ON →
lighting of ready lamp
Approx. 90 sec.
Rated voltage input, ambient temperature
20°C, humidity 65%RH
JAM recovery 10 sec. (reference value)
(Varies depending on the fusing
temperature at which a paper jam occurs)
2 – 1
To Next Page
Loading...
