3 Open the front cabinet and remove the duct.
Remove the process guide rail.
4 Remove the LSU lead wire connector.
5 Loosen the screws securing the laser unit.
6 Slide the LSU toward the front frame to remove.
Note: After reinstalling the LSU, adjust its distortion.
11. PWB
(1) ICU PWB
1 Remove the right and left document guides and remove the table
glass.
2 Remove the upper dark box cover.
3 Remove the right and left cabinets.
Note: Reinstall the table glass with the cut surface pointed up-
ward.
4 Remove the ICU PWB cover.
5 Remove the ICU PWB.
Process guide rail
Duct
Laserstrahl
CAUTION
VORSICHT
ADVARSEL
VARNING
VARO!
LSU
Upper right
cabinet
Right-side
cabinet
Table glass
Cut surface
Documcnt guide
ICU PWB cover
ICU PWB
7 – 15
To Next Page
Loading...
