3-35
CHAPTER3
SELECT STAMP
The SELECT STAMP function adds a selected stamp such as
“Confidential” and “Urgent” to the copies. The stamp will be printed in
white on a shaded background.
●
The stamps which can be selected are: “Confidential”, “Urgent”,
“Copy”, “Preliminary”, “Draft”, and “Final”.
●
The darkness of the shaded background can be adjusted in three
levels.
●
The print position can be selected from six positions.
●
If reduction or enlargement is used with this function, the print
position may move or the stamp may not be printed.
1
Place the originals in the document feeder tray or on
the document glass.
2
Press the SPECIAL MODES key.
●
The SPECIAL MODES screen will appear.
3
Press the “TEXT STAMP” key on the touch panel.
●
The TEXT STAMP menu will appear.
4
Press the “SELECT STAMP” key on the touch panel.
●
The setting screen for SELECT STAMP will appear.
To Next Page
Loading...
