R
Russell GeorgeJul 30, 2025
Why does my Sharp AR-287 produce copies with dust, dirt, or smudges?
- PphernandezJul 30, 2025
The document glass or RADF transport belt may be dirty. Clean these components regularly.
Why does my Sharp AR-287 produce copies with dust, dirt, or smudges?
The document glass or RADF transport belt may be dirty. Clean these components regularly.
Why does the Sharp Copier display “THE SYSTEM IS NOT CONFIGURED TO PERFORM TANDEM JOB. CODE: XX” and tandem copying fails?
Tandem copying will not work unless the same optional equipment is installed on both the main and sub copiers. Also, ensure that the settings for 'Disabling of Duplex Copying,' 'Disabling of Stapler,' and 'Disabling of Bypass-Tray When Offset Tray Selected' are identical on both copiers.
What to do if the Sharp AR-287 displays “CHECK T HE SU B MACHINE.” and tandem copying won't start?
If a message appears on the touch panel of the sub copier, follow the instructions provided in that message to resolve the problem. This should allow tandem copying to start.
How to adjust Sharp AR-287 touch panel if it's too dark or too light?
This is likely due to the LCD contrast not being properly adjusted. You can adjust the LCD contrast using the instructions on page 6-7.