Sharp AR-287

[2] SPECIFICATIONS
(AR-287/337/407/507)
1. Machine type
Product
Name
CPM Type
Document
Feeder
Paper
Exit
Memory
RAM HD
AR-287 28 Duplex Desk top RADF 1 tray 32 MB 4.3 GB
AR-337 33 Duplex Desk top RADF 1 tray 32 MB 4.3 GB
AR-407 40 Duplex Desk top RADF 1 tray 32 MB 4.3 GB
AR-507 50 Duplex Desk top RSPF 1 tray 48 MB 4.3 GB
* Standard’s spec
13. Additional functions
A. Main body functions
APS
AMS AMS by flow scan with DF is not allowed.
Auto tray switching
1 scan multi copy
Rotation copy
Pre-heat Conditions are set with the key operation.
Auto shut off Conditions are set with the key operation.
Message display
Key operator program
Communication E-mail Status/E-mail Alerts
Process control
Coin vendor
Only the connector is provided on the
PWB.
B. Copy function
AR-287/337 AR-407 AR-507
Job call/ registration 9
Dept. control
Max. 50 dept. Max. 500 dept.
(Copy/Print/Tandem)
Binding margin
Shift width AB series: 10mm, Inch series: 1/2"
with adjustment (Binding direction selectable)
Edge erase
AB series: 10mm, Inch series: 1/2" with
adjustment
Center erase
1-set, 2-copy
Independent zooming
25 to 800% for
vertical/horizontal
25 to 400% for
vertical/horizontal
White/black reversion All surface only (only in the manual mode)
Cover paper Cover/back cover/cover and back cover
OHP insert paper
Insert paper copy Yes/No
selectable
Only 1 face-up
paper exit is possible
Centering
Multi shot (Nin1)
Repeat copy Combination with AMS allowed
Date print Time setting by the key operation.
Stamp function
Middle binding
Page print
Confidential print
Security function Security ROM is installed. (AR-FR1/FR2/FR3)
Tandem print (copy/print)
When the tandem connection cable is connected
(AR-287 invalid)
Network scanner When the scanner expansion kit is installed
Document scan mode
(Large quantity
document mode)
Documents of 120 sheets
15. Other specifications
Photoconductor kind OPC drum
Photoconductor dia. 65 f
Process cleaning Blade
Exposure lamp No-electrode xenon lamp
Developing system Dry, 2-component magnetic brush
development
Charging system DC negative scorotron (saw tooth
electrode)
Transfer system DC positive control
Separation system AR-287/337/
407
AC corotron/DC bias
separation pawl
AR-507 Photo discharge/AC corotron
/DC bias separation pawl
Fusing system Heat roller
Fusing cleaning AR-287/337/
407
—
AR-507 Yes
16. Outlook
W ´ D ´ H (mm)
Machine
occupying
dimensions
Weight
AR-287/337 600 ´ 695 ´ 750 1292 ´ 695 Approx 98 kg
AR-407 600 ´ 700 ´ 750 1292 ´ 700 Approx 98 kg
AR-507 600 ´ 700 ´ 773 1292 ´ 700 Approx 102 kg
AR-287/337
AR-407/507
2 – 7 3/13/2000