*1: "Option" means a finisher, an ADU, a paper feed desk, a large-
capacity tray, or a paper feed module.
(Operations when there is a difference between the option com-
positions)
1. Tandem copy: The tandem copy key is displayed, but the
conditions to execute the tandem function are not satisfied.
Code: XX
Code Tandem operation condition
00 SCSI communication disable
Code Tandem mirror condition
10 Model code disagreement
11 ICU-ROM version disagreement
12 PCU-ROM version disagreement
13 OPE-ROM version disagreement
20 After-process unit connection disagreement
21 Paper exit port connection disagreement
22 ADU connection disagreement
23 DESK connection disagreement
24 LCC connection disagreement
30 ADU trouble information disagreement
40 Sim26-6: Destination setup disagreement
41 Sim26-46: Image output direction setup disagreement
50 Security mode setup disagreement
51 Duplex copy inhibition setup disagreement
52 Staple inhibition setup disagreement
53 Manual tray select inhibition disagreement when
offset tray is selected
2. Tandem print: All the prints are made by MAIN.
22. Confidential print
(Outline)
To protect confidential documents, print is inhibited unless the user
performs the specified operation from the main operation panel after
giving a print command from PC.
(1) Accumulated print jobs
Number of jobs Number of pages of one job (A4, letter)
1 320 pages
2 240 pages
4 120 pages
8 60 pages
16 28 pages
(2) The following operations can be performed during
operation of confidential print or during confidential
printing.
· Checking all the lists of the accumulated confidential prints.
· Delete of confidential print data (Password entry is required.)
· Cancel of confidential print during printing by means of the "C" key.
Invalid during recovery from pre-heat.
(3) The following operations cannot be performed during
confidential printing.
· Changing the environment setup by means of the environment
setup key.
· Command of continuous output in a different size or from a differ-
ent tray
· For confidential printing, paper selection is allowed only in AUTO
selection.
· For confidential printing, paper insertion, booklet, and OHP index
paper insertion are inhibited.
(4) Confidential print output operation is allowed or
inhibited as follows
Ready: Allowed
Copy reading: Inhibited
Copy outputting: Inhibited
Scanner document scanning: Inhibited
Scanner data transmission: Inhibited
Printing: Inhibited (Confidential print allowed
when interrupted in offline.)
Staple printing: Inhibited
Tandem copy reading: Inhibited
Tandem copy outputting: Inhibited
Tandem print outputting: Inhibited
(5) Conditions of password
Number of digits: 5
Characters: Only numeric figures 0 to 9
(6) Process in the case of HDD overflow
· The job is canceled.
· The status monitor makes the error display to PC.
· Notice Page output is performed.
(7) Troubles during printing
When the machine is stopped by paper empty or a paper jam, re-
move the trouble, and the job will be automatically continued.
(8) Combination with the security function
· When the security function is ON, confidential print is inhibited.
· When confidential data is received, it is automatically canceled.
· The status monitor makes the error display to PC.
· Notice Page output is performed.
Client PC
Enter PIN.
In the driver menu.
Image data
PIN data
After RIP, image data and
PIN are stored.
Enter PIN on the operation panel.
Printout
PIN
Network card
Printer board
HDD
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
✱ ✱ ✱ ✱ ✱
PIN
✱ ✱ ✱ ✱ ✱
AR-287/337
AR-407/507
2 – 9 3/13/2000
To Next Page
Loading...
