68
● Disabling of Optional Paper Drawer*
8
Disable 95
● Disabling of Tray Setting Disable 95
● Disabling of Finisher*
9
Disable 95
● Disabling of Offset Disable 95
● Disabling of Stapler*
9
Disable 95
● Saddle Stitch Position Adjust*
10
0.0 mm 95
● Disabling of Punch*
11
Disable 95
● Disabling of Colour Mode*
12
Disable 95
● Auto Paper Selection Setting Plain Paper 96
● Registration Adjustment
96
X Auto Adjustment –
● Optimization of the Hard Disk – 96
● Tandem Connection Setting
96
X IP Address of Slave Machine 0.0.0.0
X Port Number 50001
X Disabling of Master Machine Mode Disable
X Disabling of Slave Machine Mode Disable
● Clear All Job Log Data – 96
● Detect Standard in Auto Colour Mode 3 96
■ Copy Settings
97
● Initial Status Settings
97
X Colour Mode Full Colour
X Paper Tray Varies depending on the machine configuration
X Exposure Type Auto
X Copy Ratio 100%
X 2-Sided Copy 1-Side to 1-Side
X Output –
● Exposure Adjustment
97
X Colour
Document Glass 5
Document Feeder 5
X B/W
Document Glass 5
Document Feeder 5
● Rotation Copy Setting Enable 97
Item Factory default setting Page
To Next Page
Loading...
