Sharp MX-2610N - Page 41

MX-3610N Dehumidifying heater 3 – 14
2) Attach the clamp to the frame. Connect the harness of the
heater unit for the tray 2 to the heater harness, and pass it
through the clamp.
3) Attach the high temperature caution label to the paper feed
tray 2.
(8) Tray 3/4 heater unit attachment
1) Pass the harness of the heater unit for the tray 3/4 through the
hole in the frame. Attach the heater unit for the tray 2 to the
frame, and fix it with a screw (M3 x 6).
2) Attach the clamp to the frame. Connect the harness of the
heater unit for the tray 3/4 to the frame, and pass it through the
clamp.
3) Attach the high temperature caution label to the frame.
(9) Connector connection
1) Remove the rear cabinet cover of the machine.
2) Connect the heater harness to the machine harness.
1
2
2
2
2
1
1
2