Need help?Do you have a question about the Sharp Gemini II Plus MX-2614N and is the answer not in the manual?
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Pages per minute | 26 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 26 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Paper Capacity | Maximum: 3, 100 sheets |
| Duplexing | Yes |
| Network Connectivity | 10Base-T/100Base-TX/1000Base-T |
| Operating System Compatibility | Windows, Mac |
| Type | Color Multifunction Printer |
Guide for auto developer adjustment before toner installation.
Configuration of machine destination, paper count, alarms, and remote access.
Setting cassette size and paper type using system settings.
Performing image writing adjustment for registration and drum position.
Automatic adjustment for print magnification and offset.
Adjusting image position and void for platen and SPF.
Adjusting image position and void for RSPF and DSPF.
Performing automatic colour calibration for copy/engine.
Settings for fax software, destination, and memory.
Displaying toner remaining status.
Activating optional products and checking firmware.
Adjusting clock, time zone, and date.
Backing up system settings and configuration.
Step-by-step procedure for factory mode colour calibration.
Lists components and their maintenance requirements or replacement.
Specifies the correct powder for maintenance items.
Outlines scheduled maintenance tasks for consumables and parts.
Lists simulation codes for various adjustments.
Lists simulation codes for image quality adjustments.
Outlines maintenance tasks for 300K interval.
Details the coin vend interface, connector, and auditor requirements.
Step-by-step guide to register product keys for options.
Instructions for upgrading firmware using a USB memory device.
Instructions for upgrading firmware using the network interface.
Steps for recovering firmware using the CN method and USB.
Lists current firmware and print driver versions for the models.
Lists simulation codes for copier operations and tests.
Simulation codes for data output, checks, and device configuration.
Simulation codes for sensor tests and Felica card operations.
Simulation codes for bypass and OSS adjustments.
Simulation codes for fuser settings and process control.
Simulation codes for copy and image density adjustments.
Simulation codes for magnification and motor adjustments.
Simulation codes for firmware update and image position.
Simulation codes for resist roller and document feeder adjustments.
Simulation codes for MFP data settings.
Simulation codes for data import/export and memory tests.
Simulation codes for LSU and HDD diagnostics and operations.
Simulation codes for CCD adjustment and self-tests.
Continues self-test simulation codes.
Simulation codes for LCD and Fax operations.
Simulation codes for printer board operations and adjustments.
Lists trouble codes related to PCU, SCU, Main Charger, PTC, Finisher, and Discharge Lamp.
Lists trouble codes for toner, paper feed, fax, thermistors, and motors.
Lists trouble codes for personal counter, battery, EEPROM, paper feed, and ASIC issues.
Lists jam codes and sensor locations in the main body of the machine.
Lists jam codes related to RSPF sensors.
Lists jam codes and sensor locations in the desk unit.
Lists jam codes and sensor locations in the inner finisher.
Diagram and list of memory locations on the MFP PWB.
To Next Page
