Sharp Gemini II Plus MX-2614N User Manual

Maintenance
15
Document Solutions After Sales Service
Maintenance Indications:
DK
Black Drum (Counter) has reached
the specified life.
Replace Black Drum
Process
Section
(Drum)
DC
Cyan Drum (Counter) has reached
the specified life.
Replace Cyan Drum
DM
Magenta Drum (Counter) has reached
the specified life.
Replace Magenta
Drum.
DY
Yellow Drum (Counter) has reached
the specified life.
Replace Yellow Drum.
VK
Black Developer (Counter) has reached
the specified life.
Replace Black
Developer.
Process
Section
(Developer)
VC
Cyan Developer (Counter) has reached
the specified life.
Replace Colour
Developer Kit.
VM
Magenta Developer (Counter) has reached the
specified life.
VY
Yellow Developer (Counter) has reached
the specified life.
FK1
Fuser Belt and Cleaner Roller Print Counter has
reached the specified limit.
Replace the Upper
Fuser Roller Kit.
Fuser Section
FK2
Fuser Heat Roller Counters have reached the
specified limit
Replace the Heat
Roller Kit
TK1
Primary Transfer Unit Counter has reached the
specified limit.
Replace the Primary
Transfer Belt and/or
Rollers.
Transfer
Section
TK2
Secondary Transfer Unit Counter has reached
the specified limit.
Replace the Secondary
Transfer Belt and
Roller.
TA Maintenance [All] Counter has reached specified limit
CA Maintenance [Colour] Counter has reached specified limit
AA Maintenance [All] & [Colour] Counters have reached the specified limits
Starting Powder:
The following starting powder should be applied to the relevant consumable item during maintenance:-
OPC Drum Primary Transfer Belt
UKOG-0312FCZZ
[Stearic Acid]
UKOG-0123FCZZ
[Kynar Powder]
Do not apply Stearic Acid (UKOG-0312FCZZ), Strontium Titanium (UKOG-0316FCZZ) or Titanium
Hydroxide (UKOG-0322FCZZ) starting powder to the Primary Transfer Belt.

Sharp Gemini II Plus MX-2614N Specifications

General

Brand	Sharp
Model	Gemini II Plus MX-2614N
Category	All in One Printer
Language	English