Product Key Registration
20
Document Solutions After Sales Service
Procedure:
1. Make a note of the Copier Serial Number upon which the option is to be installed.
For MX2310U, the serial number can be obtained from the following menu:-
Custom Settings – Admin Authentication (Password) – Product Key – Serial Number
2. Make a note of the Application number from the front of the option Operation Manual.
3. Access the following URL, with the user name and password indicated
https://dse-pub.sharp.co.jp/key/
User Name: keyuser
Password: key000323
4. Select your region (UK).
5. Register the option(s) against the Sharp Copier Serial Number by completing the following Web form.
As shown, multiple options can now be registered at the same time:-
Note: When inputting the data, please ensure that the prefix letter of the Application number is entered in
UPPERCASE. Also, if the machine serial number ends in X or Y, that must also be entered in UPPERCASE.
6. Click Send.
The Product Activation Key(s) will then be displayed. Also, an E-mail confirmation will
be sent to the E-Mail address of the dealer representative.
Enter the Product Key and enable the option(s) from within the following menu:-
Custom Settings – Admin Authentication (Password) – Product Key
To Next Page
Loading...
Need help?
General
