To Next PageTo Next Page
Need help?Do you have a question about the Sharp IMAGER AR-5316 and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Print Speed | 16 ppm |
| Max Resolution | 600 x 600 dpi |
| Copy Speed | 16 cpm |
| Warm-Up Time | 25 seconds |
| Type | Monochrome |
| Functions | Print, Copy, Scan |
| Interface | USB 2.0 |
| Scan Resolution | 600 x 600 dpi |
| Original Size | A3 |
| Scan to | Email, PC |
| Paper Capacity | 350 sheets |
Highlights flexible copy features, 16 ppm speed, 11x17 output, and customer-replaceable supplies for continuous workflow.
Details the optional PRICOM 3100 print server for network connectivity, including RJ-45 Ethernet and web-based management.
Lists required tools, service manuals, and parts guides for the AR-5316, including product codes.
Provides product codes for toner and drum cartridges and a link to download MSDSs from the Sharp service website.
Warns about electrical hazards, proper grounding, ESD precautions, and handling of electronic components.
Identifies external parts of the AR-5316 through diagrams and a labeled component list for easy reference.
Illustrates internal components of the AR-5316 with numbered diagrams and a detailed list of parts and their locations.
Lists available optional equipment for the AR-5316, including the 40-Sheet Single Pass Feeder and Network Print Server.
Details adjustments for the process section, including developing doctor gap, MG roller position, and voltage checks.
Covers mechanism adjustments like image position, scanning direction distortion, and magnification ratio adjustments.
Describes the process for adjusting image density in copy mode, referencing specific SIM codes for the procedure.
Provides step-by-step instructions to enter the AR-5316's simulation mode using specific key sequences.
Explains how to cancel or interrupt the simulation mode, including returning to normal operation after exit.
Lists SIM codes for mirror scanning, paper feeders, fusing, and developing operations, with corresponding sub-codes and content.
Continues the SIM codes list, covering toner motor, counters, maintenance settings, and various display functions.
Lists SIM codes for clearing counters, motor checks, settings like size, auditor, and machine condition checks.
Covers SIM codes for paper sensors, fusing settings, density/contrast adjustments, magnification ratios, and SPF operations.
Details user-configurable settings like Auto clear time, Preheat mode, Auto power shut-off timer, Stream feeding, and Auto power shut-off.
Explains settings for Auditing mode, account management (entry, change, deletion), copy counts, and resolution adjustment.
Provides a table outlining maintenance tasks (clean, adjust, replace) for various unit names and parts, with calling indicators.
