Quick Reference Guide: AR-5316
Simulation
7
Simulation
Entering the Simulation Mode
Perform the following procedure to enter the simulation mode.
“#” key → Interrupt key → “C” key → Interrupt key →
Main code → Start key → Sub code → Start key
SIM Codes
Please refer to the SIM Codes list (pages 1 through 4) that follows.
Canceling the Simulation Mode
When the clear all key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and
the screen returns to the sub code entering display.
Note 1: After canceling the simulation mode, be sure to turn the
OFF/ON power switch to the ON position.
Note 2: If the machine is terminated by a jam error or paper empty
during copying in the adjustment by the simulation, recopying
is required.
To Next Page
Loading...
