Sharp Gemini II Plus MX-2614N User Manual

Colour Calibration
14
Document Solutions After Sales Service
12. After performing the colour calibration press “OK”, the initial setting of the half tone calibration
will be performed
13. Wait until “EXECUTE” key is displayed, and then press it
14. Once “COMPLETED THIS PROCEDURE” is displayed, the adjustment operation is completed.
Cancel SIM46-74.
The adjustment results only become valid when both engine and printer adjustments have been
completed in full, if the simulation is cancelled after just the engine calibration is performed the
adjustment result is invalid.

Sharp Gemini II Plus MX-2614N Specifications

General

Brand	Sharp
Model	Gemini II Plus MX-2614N
Category	All in One Printer
Language	English