Sharp MX-2610N - Product Specifications: Connectivity; Fax System Features; Network Printer and OS Support

21
Type
Built-in type
Continuous print speed
Same as continuous copy speed
Resolution
Data processing: 600 × 600 dpi, 1,200 × 1,200 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi, 1,200 × 1,200 dpi
Page description language
Standard: PCL6 emulation, PS3 emulation *1
Compatible protocols
TCP/IP, IPv4/IPv6, IPX/SPX, NetBEUI, IPP, EtherTalk *1
Compatible OS
Windows 2000, Windows XP, Windows 2000 Server, Windows Server 2003,
Windows Vista, Windows Server 2008, Windows 7
Macintosh (Mac OS 9.0 ~ 9.2.2, OS X 10.2.8, 10.3.9, 10.4 ~ 10.4.11, 10.5 ~
10.5.8, 10.6 ~ 10.6.2)*1
Network Printer Specifications
Internal fonts (options)
80 fonts for PCL, 136 fonts for PS3 emulation
Memory
Machine system memory and hard disk
Interface
10BASE-T/100BASE-TX/1000BASE-T, USB 1.1, USB 2.0 (high speed mode)
*1: When equipped with a PS extension kit (MX-PK11).
Fax Specifications
Transmission time
Approx. 2 seconds *1 (8-1/2" × 11" (A4) Sharp standard paper, normal
characters, Super G3 (JBIG))
Approx. 6 seconds (G3 ECM)
Memory
1 GB
Notes
Touch dial memory Max. of 2,000 entries (Including group dialing for fax,
scanner, and Internet fax)
Entries per group Max. of 500 entries
Mass transmissions Max. of 500 recipients
*1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the International
Telecommunications Union (ITU-T). This is the speed for when sending an 8-1/2" × 11" (A4) size piece of paper
of around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed mode (33.6 kbps). This is
the transmission speed for image information only and does not include time for transmission control. The actual
time needed for a transmission depends on the content of the text, type of receiving fax machine, and telephone
line conditions.
Name
Facsimile expansion kit (MX-FX11)
Useable lines
General phone lines (PSTN), private branch exchange (PBX)
Scanning line density
Normal characters: 8 dot/mm × 3.85 chars/mm
Small characters: 8 dot/mm × 7.7 line/mm
Fine characters: 8 dot/mm × 15.4 line/mm
High-definition: 16 dot/mm × 15.4 line/mm
Connection speed
Super G3: 33.6 kbps, G3: 14.4 kbps
Coding method
MH, MR, MMR, JBIG
Connection mode
Super G3 / G3
Original paper sizes for transmission
11" × 17" (A3) to 5-1/2" × 8-1/2" (A5) (Paper with a max. length of
1,000 mm* can be transmitted (one-sided and B/W only).)
Registered paper size
11" × 17" (A3) to 5-1/2" × 8-1/2" (A5)