Sharp MX-3050N User Manual

1-159
BEFORE USING THE MACHINE►MAINTENANCE
REPLACING THE WASTE TONER BOX
The waste toner box collects excess toner that is produced during printing. When the waste toner box becomes full, the
message "Replace waste toner box." will appear.
When this message appears, tap the guidance key that appears on the touch panel to view the procedure for replacing
the waste toner box.
When the key is tapped, instructions for replacing the waste toner box will appear. Follow the instructions. When the
waste toner box is replaced, the message will automatically disappear.
When a finisher (large stacker) or saddle stitch finisher (large stacker) is installed on the MX-5050N/MX-5070N/MX-6050N/
MX-6070N, open the front cover on the finisher (large stacker), or the front upper cover on the saddle stitch finisher (large
stacker), before opening the front cover of the machine.
• Do not throw the waste toner box into a fire. Toner may fly and cause burns.
• Store the waste toner box out of the reach of small children.
Information
Replace waste toner box.

Sharp MX-3050N Specifications

General

Print Speed	30 ppm
Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	30 cpm
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	6, 300 sheets
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Touchscreen	Yes
Paper Size	A3, A4, A5, B4, B5, Letter, Legal
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	80 ipm (simplex)