1-65
BEFORE USING THE MACHINE►LOADING PAPER
IMPORTANT POINTS ABOUT PAPER
NAMES AND LOCATIONS OF TRAYS
THE DEFINITION OF "R" IN PAPER SIZE
To indicate the landscape setting, "R" is added to the end of the name of a paper size enabled for both landscape and
portrait settings.
LOADING PAPER
Paper that can be set either in the portrait or landscape orientation Paper that can only be set in the
landscape orientation
A4, B5, 8-1/2" x 11" SRA3, A3W, A3, SRA4, B4, 12" x 18",
11" x 17", 8-1/2" x 14", 8-1/2" x 13"
Paper set in the landscape orientation Paper set in the portrait orientation Can be placed only in the landscape
orientation
Tray 1
Tray 2
(when a low stand/550 sheet paper drawer or
stand/550/2x550/3x550/550&2100 sheet paper
drawer is installed)
Tray 3
(when a stand/550&2100 sheet paper
drawer is installed)
Tray 5
(when a large capacity
tray is installed)
Tray 4
(when a stand/550&2100 sheet
paper drawer is installed)
Tray 3
(when a stand/2x550/3x550 sheet paper
drawer is installed)
Tray 4
(when a stand/3x550 sheet paper drawer
is installed)
Bypass tray
To Next Page
Loading...
