Sharp MX-3050N User Manual

2-134
COPIER►OTHER FUNCTIONS
ADJUSTING THE INTENSITY OF A COPY (INTENSITY)
This function adjusts the intensity (saturation) of a colour copy image.
You must set the intensity before scanning the original.
This function cannot be combined with [Copy of Copy] or [Colour Tone Enhancement] in Exposure.
1
Tap the [Others] key, and tap the [Intensity] key.
2
Tap the key or slide the slider to
adjust the intensity.
After the settings are completed, tap and [Back] keys in
sequence.
To cancel the Intensity setting:
Tap the [Off] key.
3
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-82)
► DOCUMENT GLASS (page 1-84)
To cancel all settings:
Tap the [CA] key.
4
Tap the [Colour Start] key to start copying.
Weakening the intensity Originals Strengthening the intensity
Others
Preview
Start
Colour
Start
Back
Intensity
This setting is only applied to colour.
Colour Mode
Exposure
Select Type/Exposure
Off
On
Darker
-2 -1 0
21
Change Size/Direction.
Original
Lighter
A3
Adjust Thickness of RGB
RGB
Adjust Brightness
Brightness
CA
B/W

Sharp MX-3050N Specifications

General

Print Speed	30 ppm
Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Copy Speed	30 cpm
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Maximum Paper Capacity	6, 300 sheets
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Maximum Paper Size	A3
Touchscreen	Yes
Paper Size	A3, A4, A5, B4, B5, Letter, Legal
Operating System Compatibility	Windows, Mac, Linux
Scan Speed	80 ipm (simplex)