Sharp MX-3610N

SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
SHARP CORPORATION
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
NOTE FOR SERVICING
[1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] CONSUMABLE PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
[3] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . 3-1
[4] ADJUSTMENTS AND SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
[5] SIMULATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
[6] TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
[7] FIRMWARE UPDATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
[8] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
[9] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
[10] VARIOUS STORAGE DATA HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
[11] SERVICE WEB PAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
[12] OPERATIONAL DESCRIPTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
[13] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
[14] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-1
[15] TOOL LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1
TopPage
CODE: 00ZMX3610/S5E
DIGITAL FULL COLOR
MULTIFUNCTIONAL SYSTEM
MX-1810U/2010U
MX-2310U/3111U
MX-2610N/3110N
MX-3610N
MODEL
CONTENTS

Sharp MX-3610N Specifications

General

Brand	Sharp
Model	MX-3610N
Category	All in One Printer
Language	English

Summary

Consumable Parts and Maintenance Items

Consumable Supply System Table

Details on toner, developer, and drum units, including model names and regional availability.

Maintenance Parts List

Adjustments and Settings Procedures

Adjustment Item List

ADJ 1: Developing Unit Adjustment

Procedures for adjusting developing doctor gap, roller pole position, and toner density control.

ADJ 2: High Voltage Values Adjustment

Guides for adjusting main charger grid voltage, developing bias, and transfer current/voltage.

ADJ 3: Image Density Sensor Adjustment

Procedures for calibrating image density sensors and adjusting their sensitivity.

ADJ 4: Image Lead Edge Position, Loss, Void, Off-Center, Magnification Ratio Adjustment (Automatic)

Covers automatic adjustments for print, scan, and copy image quality parameters.

ADJ 5: Print Engine Image Distortion, OPC Drum Phase, Color Registration Adjustment (Print Engine)

Manual adjustment procedures for print engine image distortion, drum phase, and color registration.

ADJ 6: Scan Image Distortion Adjustment (Document Table Mode)

Guides for adjusting scanner parallelism and image distortion in document table mode.

ADJ 8: Scan Image Focus Adjustment

Procedure for adjusting the scan image focus and magnification ratio.

ADJ 9: Print Lead Edge Image Position Adjustment (Printer Mode)

ADJ 10: Color BalanceDensity Adjustment

Covers manual and automatic adjustments for copy and printer color balance and density.

ADJ 11: Paper Size Sensor Adjustment

ADJ 12: Document Size Detection Adjustment

ADJ 15: Print Image Position, Magnification Ratio, Void Area, Off-Center Adjustment (Print Engine) (Manual)

Manual adjustments for print engine image quality parameters like position and magnification.

ADJ 16: Scan Image Magnification Ratio Adjustment (Manual)

Manual adjustment of scan image magnification ratio for document table and RSPF modes.

ADJ 17: Scan Image Off-Center Adjustment (Manual)

Manual adjustment for scan image off-center position in document table and RSPF modes.

ADJ 18: Copy Image Position and Image Loss Adjustment (Manual)

Manual adjustment for copy image position, loss, and void area in RSPF and document modes.

ADJ 19: Finisher and Punch Unit Adjustments

Simulation Mode Procedures and Codes

General Purpose and Functions of Simulation Mode

Accessing and Navigating Simulation Mode

List of Simulation Codes and Functions

Detailed Simulation Procedures (Tests)