44
Copying an 11" x 17" size original without cutting off
the edges (11x17 Full Bleed)
Copying in the center of the paper (Centering)
Reversing white and black in a copy (B/W Reverse)
Adjusting red/green/blue in copies (RGB Adjust)
Adjusting the sharpness of an image (Sharpness)
Use this feature to make a full-size copy
of an 11" x 17" original on 12" x 18"
paper so that the edges are not cut off.
The original must be placed on the
document glass.
Use this function to position the copy
image at the center of the paper.
This is convenient when the image is
reduced or copied onto paper that is
larger than the original.
This function reverses black and white
in a copy to create a negative image.
Use this function to save toner when
copying an original with large black
areas.
Use this function to strengthen or weaken red, green, or blue (one color only) and thereby change the overall hue
of the copy.
An image of this function is shown at the end of this manual.
Use this function to sharpen or soften a copy image.
An image of this function is shown at the end of this manual.
mx4100_us_qck.book 44 ページ ２００８年８月１日 金曜日 午前１１時０分
To Next Page
Loading...
