Sharpdesk Mobile Operation Manual
9
Copyright © 2012 SHARP CORPORATION All rights reserved.
X. Enter IP address and port number to add a
printer/scanner.
(note) Port number is necessary for print from
the device. Enter the same port number as
configured on the printer. If different port
number is entered, this application cannot print
to the printer.
To check the port number in the printer, see
[Application Settings]-[Setting for Print from the
PC]. The default port number for both printer
and device is 21.
Also, FTP print has to be enabled on the printer.
To Next Page
Loading...
Need help?
General
