Sharp MX-5112N

22
SPECIFICATIONS
Network Scanner Specications
Type Colour scanner
Scan resolution (main × vertical)
100 × 100 dpi, 150 × 150 dpi, 200 × 200 dpi, 300 × 300 dpi,
400 × 400 dpi, 600 × 600 dpi (push scan)
50 to 9,600 dpi *1 (pull scan)
Scan speed
(A4 (8-1/2" × 11"))
B/W
Colour
Reversing Single Pass Feeder (RSPF)
51 sheets/minute (200 × 200 dpi)
(one-sided)
51 sheets/minute (200 × 200 dpi)
(one-sided)
Duplex Single Pass Feeder (DSPF)
75 sheets/minute (200 × 200 dpi)
(one-sided)
75 sheets/minute (200 × 200 dpi)
(one-sided)
 When in standard mode using Sharp standard paper (A4 (8-1/2" × 11") size
with 6% coverage) and the auto colour detector is turned off. The speed
varies depending on the data volume of the original.
Interface
10BASE-T/100BASE-TX/1000BASE-T,
USB 2.0 (during USB memory scanning)
Compatible protocols TCP/IP (IPv4/IPv6)
Compatible OS *2
Pull scan (TWAIN) Windows 2000, Windows XP, Windows 2000 Server, Windows
Server 2003, Windows Vista, Windows Server 2008, Windows 7
Output format
(B/W)
TIFF, PDF, PDF/A, encrypted PDF, XPS *3
Compression method: decompression, G3 (MH), G4 (MMR)
(Grey scale/colour)
TIFF, JPEG, PDF, PDF/A, encrypted PDF, high compression PDF *4, XPS *3
Compression method: JPEG (high, mid, and low compression, Emphasis black
letter)
Driver TWAIN compliant
*1: You must decrease the scan size when increasing the resolution.
*2: There are cases when a connection cannot be established. Please contact your local dealer for more information.
*3: XPS (XML Paper Specication)
*4: When equipped with an Enhanced compression kit (MX-EB11).
Type Built-in type
Continuous print speed Same as continuous copy speed
Resolution
Data processing: 600 × 600 dpi, 1,200 × 1,200 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi, 1,200 × 1,200 dpi
Page description language Standard: PCL6 emulation, PS3 emulation *1
Compatible protocols TCP/IP, IPv4/IPv6, IPX/SPX, NetBEUI, IPP, EtherTalk *1
Compatible OS
Windows 2000, Windows XP, Windows 2000 Server, Windows Server 2003,
Windows Vista, Windows Server 2008, Windows 7
Macintosh (Mac OS 9.0 ~ 9.2.2, OS X 10.2.8, 10.3.9, 10.4 ~ 10.4.11, 10.5 ~
10.5.8, 10.6 ~ 10.6.5)*1
Network Printer Specications
Internal fonts (options) 80 fonts for PCL, 136 fonts for PS3 emulation
Memory Machine system memory and hard disk
Interface 10BASE-T/100BASE-TX/1000BASE-T, USB 1.1, USB 2.0 (high speed mode)
*1: When equipped with a PS extension kit (MX-PK11).
Fax Specications
Transmission time
Approx. 2 seconds *1 (A4 (8-1/2" × 11") Sharp standard paper, normal
characters, Super G3 (JBIG))
Approx. 6 seconds (G3 ECM)
Memory 1 GB
Notes
Touch dial memory Max. of 2,000 entries (Including group dialling for fax,
scanner, and Internet fax)
Entries per group Max. of 500 entries
Mass transmissions Max. of 500 recipients
*1 Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the International
Telecommunications Union (ITU-T). This is the speed for when sending an A4 (8-1/2" × 11") size piece of paper of around
700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed mode (33.6 kbps). This is the transmission
speed for image information only and does not include time for transmission control. The actual time needed for a
transmission depends on the content of the text, type of receiving fax machine, and telephone line conditions.
Name Facsimile expansion kit (MX-FX11)
Useable lines General phone lines (PSTN), private branch exchange (PBX)
Scanning line density
Normal characters: 8 dot/mm × 3.85 chars/mm
Small characters: 8 dot/mm × 7.7 line/mm
Fine characters: 8 dot/mm × 15.4 line/mm
High-denition: 16 dot/mm × 15.4 line/mm
Connection speed Super G3: 33.6 kbps, G3: 14.4 kbps
Coding method MH, MR, MMR, JBIG
Connection mode Super G3 / G3
Original paper sizes for transmission
A3 (11" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max. length of
1,000 mm can be transmitted (one-sided and B/W only).)
Registered paper size A3 (11" × 17") to A5 (5-1/2" × 8-1/2")