2-142
COPIERâ–ºCONVENIENT COPY FUNCTIONS
RETRIEVING A PROGRAM
DELETING AND RENAMING A PROGRAM
This section explains how to delete copy settings in a program and rename a program.
Deleting a program
5
Select whether or not the program will
be added to the home screen or the
favourites.
To specify print settings, you can select the required one
from pre-set text or use the soft keyboard. You can also print
serial number and account job ID.
When you have completed the settings, tap and the
[Back] keys in sequence.
• If user authentication is enabled, the shortcut key for the program is registered in the user's home screen or favourite.
• If user authentication is disabled, the administrator password entry screen appears. When the administrator
password is entered, the registration is completed.
The number of copies cannot be stored.
1
Tap [Call Program] on the action panel.
2
Tap the key of the program you want to retrieve.
You can select a program key and tap [Register in Favorite] or [Register for Home] on the action panel to register a
shortcut key for the selected program in the favourite or home screen.
• A program that is already stored cannot be deleted.
• When "Settings (administrator)" - [System Settings] → [Common Settings] → [Enable/Disable Settings] → [Disabling of
Registration/Deletion of Program] is selected, a registered program cannot be deleted or renamed.
1
Tap [Call Program] on the action panel.
Start
Colour
Start
Preview
Others
A34
01
03
05
07 08
Pre-Setting
Program
Program Registration
Select Program No. to Register
01
03
05
07 08
10
10
09
09
CA
B/W
Cancel Registration
Register for
Home
Register for
Favorite
Program registration is completed.
At the same time, it can be registered
for Favorite or Home to use
as shortcut. Do you register?
To Next Page
Loading...
Need help?
General
