7-114
SYSTEM SETTINGS►SYSTEM SETTINGS
Default Original Image Type
Select the original type beforehand to enable scanning at a resolution suitable for the original.
The following settings can be configured.
• Text/Printed Photo
• Text/Photo
•Text
•Photo
• Printed Photo
•Map
Initial Resolution Setting
One of the following resolutions can be selected for the default resolution for transmission.
• 100x100dpi
• 150x150dpi
• 200x200dpi
• 300x300dpi
• 400x400dpi
• 600x600dpi
Scan Complete Sound Setting
Adjusts the volume of the beep that sounds when scanning ends. The beep can also be turned off.
Default Output Tray
Selects the default output tray for printing a file stored by Scan to HDD.
The items that appear will vary depending the machine configuration.
Disable Text/Stamp functions for Reprinting
When a stored file is retrieved and printed, the printing functions are disabled.
This function prevents an inconsistency of the date between the original data and output data and others.
Batch Print Settings
Set whether or not the [All Users] key and the [User Unknown] key are prohibited in the user name selection screen
when printing all files, whether files are sorted by date in newest or oldest order, and whether file names are sorted in
ascending or descending order.
Erase Width Adjustment
This is used to set the default erase width for erase function.
Specify a value from 0 mm (0") to 25 mm (1") in increments of 3 mm (1/8") for both edge erase and centre erase.
Card Shot Settings
This is used to set the default original size for the card shot function.
Specify a value from 25 mm (1") to 216 mm (8-1/2") in increments of 3 mm (1/8") for both the X (horizontal) and Y
(vertical) dimensions of the original.
Fit to Store Size
Always displays the [Fit to Store Size] key on the card shot screen.
Setting of store/delete after file print
Select whether or not to save or delete a file after printing.
When the exposure is set to [Auto], a default original type cannot be selected.
To Next Page
Loading...
