7-8
SYSTEM SETTINGS►SETTING MODE LIST
*1 Appears when [LDAP] is set in "Authentication Settings".
*2 Appears when "Settings (administrator)" - [Sharp OSA Settings] → [External Accounting Application Settings] →[Set
Authentication Server (Server 1)] is enabled.
*3 This setting is configured in setting mode on the web page.
*4 This setting is configured in setting mode on the machine.
Default Code Setting usecode No Yes
Remember Billing Code Between Modes Disabled No Yes
Disable Change of Billing Code Disabled No Yes
Apply Default Code when Billing Code not entered
Billing Code not Entered
Disabled
No Yes
Disable Billing Code for Selected Applications No Yes
•Sharp OSA All Invalid No Yes
Billing Code Display Name Setting No Yes
• Main Code Display Name Default No Yes
• Sub Code Display Name Default No Yes
Main Code List – No Yes
Sub Code List – No Yes
l Card Setting (page 7-79) No Yes
Card Area Setting (page 7-79) No Yes
Check System Code only in FeliCa User Area mode Disabled No Yes
Check Facility Code in HID mode Disabled No Yes
Importing from the setup file – No Yes
Card Scan Test Disabled No Yes
Card Type / Card Reader Settings (page 7-79) No Yes
Card Type / Card Reader 200 No Yes
Card Reader Device Registration*
4
– No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
