5
ACCESSING THE WEB SERVER IN THE
MACHINE
When the machine is connected to a network, the machine's built-in Web server can be accessed from a Web browser
on your computer.
OPENING THE WEB PAGES
1
Tap the [Settings] key.
2
Tap [Status] → [Network Status] from the menu.
3
Scroll the screen down and check
"IPv4 Address" in IPv4 Settings of
TCP/IP.
4
Access the Web server in the machine
to open the Web pages.
Start a Web browser on a computer that is
connected to the same network as the machine
and enter the IP address of the machine.
Recommended Web browsers
Internet Explorer: 11 or higher (Windows
®
)
Microsoft Edge (Windows
®
), Firefox (Windows
®
),
Safari (macOS
®
), Chrome (Windows
®
):
Latest version or immediately previous major release
The Web page will appear.
The machine settings may require that user
authentication is performed in order to open the Web
page. Please ask the administrator of the machine for
the password that is required for user authentication.
Easy
Fax
Easy
Scan
Easy
Copy
CLOUD PORTAL
Toner Quantity
Bk
C
M
Y
Operation
Guide
Enlarge
Display Mode
Settings Total Count Brightness
Adjustment
Job Status
10:15
Status
Machine Identification
Total Count
Device Status
Network Status
Firmware Version
Power Reset
Data List
List for User
List for Administrator
User Control
TCP/IP
TCP/IP:
IPv4 Settings:
IPv6 Settings:
DHCP:
IPv4 Address:
Subnet Mask:
Default Gateway:
Enable
Administrator Login
Top of Page
Enable
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
System
Settings
Status > Network Status
To Next Page
Loading...
Need help?
General
