Sharp MX-7580N

2-129
COPIER►OTHER FUNCTIONS
Tab copying with a right binding
Originals Placing the originals Loading tab paper
Bypass tray (on the machine)
Large capacity trays
Tray 4
Bypass tray
(on the large capacity trays)
Tab Copy must be specified before scanning the original.
To change the default image shift width for tab copying:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Initial Tab Copy Setting].
The factory default setting is 1/2" (10 mm).
1
Tap the [Others] key, and tap the [Tab Copy] key.
2
Tap the [On] key.
Originals
Final image
Document feeder tray
Insert the originals so that the
side with no tab text enters first.
Side 2
Place the first sheet of tab paper
so that the tab faces away from
you.
Place the first sheet of tab paper
so that the tab faces away from
you.
Side 2
Place the first sheet of tab paper
so that the tab faces away from
you.
Side 1
Place the first sheet of tab paper
so that the tab faces away from
you.
Side 2
1
Document glass
Place the originals so that the side
with the tab text is on the left.