5-46
SCANNER/INTERNET FAXâ–ºTRANSMITTING AN IMAGE
SCAN SIZE AND SEND SIZE (ENLARGE/REDUCE)
When the original is placed, its size is automatically detected.
In normal mode, the size of the placed original is indicated as the "Scan Size", and the size to be transmitted is indicated
as the "Send Size".
In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. For example, if the
scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission.
• Only standard original sizes can be automatically detected.
â–º THE SIZE OF THE PLACED ORIGINAL (page 5-14)
• When the original size is an inch size or a non-standard size, or if the size is not detected correctly, manually specify the
original scan size.
â–º SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE (page 5-47)
â–º SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES (page 5-48)
CA
Preview
Start
Scan Size
Auto Auto
Color Mode
Auto/Grayscale
Resolution
200x200dpi
File Format
PDF
Original
Auto
Others
100%
Send Size
Address Book
Subject
File Name
Address Touch to input Address
Verification Stamp
Call Search Number
Check Send/Receive
Status
Options
Call Program
Call Registered settings
Sending History
Global Address Search
Exposure
8½x11 8½x11
Specified by System Settings
Scan Size
A4
"Send Size" is set to
5-1/2" x 8-1/2" (B5)
Transmission
The image is reduced to
5-1/2" x 8-1/2" (B5) before
transmission
To Next Page
Loading...
Need help?
General
