8-13
SYSTEM SETTINGS►SETTING MODE LIST
*1 When a finisher/saddle stitch finisher is installed
*2 When a finisher/saddle stitch finisher is installed and a punch module is installed
*3 When a saddle stitch finisher is installed
*4 When a folding unit is installed
*5 When a trimming module is installed
X PCL Settings Yes Yes
PCL Symbol Set Setting PC-8 Yes Yes
PCL Font Setting Internal Font, 0: Courier Yes Yes
PCL Line Feed Code 0.CR=CR; LF=LF; FF=FF Yes Yes
Wide A4 Disabled Yes Yes
X PostScript Settings Yes Yes
Screen Settings Standard Yes Yes
Print PS Errors Disabled Yes Yes
Binary Processing Disabled Yes Yes
X OOXML Settings Yes Yes
Print What Selected Sheet Yes Yes
X Print Release Settings For information about each of the
print release settings, see "Print
Release Settings Guide".
No Yes
X E-mail Print Settings No Yes
E-mail Print Disabled No Yes
POP3 Server – No Yes
Port Number 110 No Yes
POP Authentication Disabled No Yes
User Name – No Yes
Password – No Yes
• Change Password Disabled No Yes
Check Interval 5 minutes No Yes
Enable SSL Disabled No Yes
Connection Test – No Yes
X Direct Print Settings (FTP) No Yes
X Direct Print Settings (Network Folder) – No Yes
X Print Setting from PC/Mobile Terminal No Yes
FTP Print Enabled No Yes
Port Number 21 No Yes
Use Banner Disabled No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
