Sharp MX-7580N - Page 785

8-32
SYSTEM SETTINGS►SETTING MODE LIST
*1 When a large capacity tray (MX-LC12) is installed
*2 When a large capacity tray (MX-LCX3 N) is installed
*3 When the large capacity trays are installed
*4 When a facsimile expansion kit is installed
*5 When an internet fax expansion kit is installed
*6 When a saddle stitch finisher is installed
*7 When a status indicator is installed
*8 When a finisher (100-sheet stapling)/saddle stitch finisher (100-sheet stapling) is installed
*9 This setting is configured in setting mode on the machine.
• Disabling of Finisher*
6
Disabled No Yes
• Disabling of Inserter*
13
Disabled No Yes
• Disabling of Offset Disabled No Yes
• Disabling of Stapler*
6
Disabled No Yes
• Disabling of Punch*
10
Disabled No Yes
• Disabling of Folding Unit*
14
Disabled No Yes
• Disabling of Trimming Module*
15
Disabled No Yes
• Disabling of Color Mode*
11
Disabled No Yes
• Disabling of Master Machine Mode Disabled No Yes
• Disabling of Client Machine Mode Disabled No Yes
 Security Settings No Yes
• Hidden Pattern Print Setting No Yes
- Disable Direct Entry Disabled No Yes
X Machine Identification Settings – No Yes
X Clock Adjust No Yes
 Clock Adjust No Yes
• Current Date – No Yes
• Specify Time Zone – No Yes
• Date&Time Settings – No Yes
• Synchronize with Internet Time Server Disabled No Yes
 Daylight Saving Time Setting Disabled No Yes
 Date Format No Yes
• Current Setting – No Yes
• Format [MM/DD/YYYY], [/], [Last],
[12-Hour Display]
No Yes
X Product Key No Yes
 Serial Number – No Yes
 Font Kit for Barcode – No Yes
 Internet Fax Expansion Kit*
5
– No Yes
 Application Integration Module – No Yes
X Custom Links*
16
– No Yes
Setup Items Factory default setting U A