Sharp MX-7580N - Page 800

8-47
SYSTEM SETTINGS►SETTING MODE LIST
Image Quality Adjustment
U: General user; A: System administrator/Administrator
Setup Items Factory default setting U A
● Image Quality Adjustment (page 8-175)
X Collective Adjustment No Yes
 Registration Adjustment*
1
– No Yes
 Fusing Cleaning Mode*
1
– No Yes
 MC Cleaning Mode*
1
– No Yes
 PTC Cleaning Mode*
1
– No Yes
 Black Letter/Black Line Width Adjustment 0 No Yes
 Black Streak Reduction Disabled No Yes
 Display warning message for black streaks detection. Disabled No Yes
X Copy Image Quality No Yes
 Quick Image Quality Adjustment 2 No Yes
 Color Balance (Color) All 0 No Yes
 Color Balance (Black & White) All 0 No Yes
 Color Copy Black Component Amount Adjustment All 0 No Yes
 Density Adjustment when [Auto] is selected for Exposure No Yes
• Color Document Glass, Document
Feeder: 5 (Normal)
No Yes
•B/W Document Glass, Document
Feeder: 5 (Normal)
No Yes
 Sharpness 2 No Yes
 Image Quality Priority No Yes
•Auto 0 No Yes
• Text/Prtd.Photo 0 No Yes
X Print Image Quality No Yes
 Quick Image Quality Adjustment No Yes
• Color 2 No Yes
•B/W 2 No Yes
 Color Balance (Color) All 0 No Yes
 Color Balance (Black & White) All 0 No Yes
 Exposure Adjustment No Yes
• Color 3 (Normal) No Yes
•B/W 3 (Normal) No Yes
 Color Line Width Adjustment 5 No Yes
X Scan Image Quality No Yes
 RGB Adjust All 0 No Yes