42
FACSIMILE
FAX MODE
Fax mode has two modes: easy mode and normal mode.
Easy mode is limited to frequently used functions that allow you to smoothly perform most fax jobs.
If you need to select detailed settings or special functions, use normal mode.
(1) Displays the sizes of the original and the data to send.
(2) Select the address and functions you want to use.
(3) Reset settings and addresses.
(4) Scan the original and show a preview image.
► PREVIEW SCREEN
(page 14)
(5) Fax transmission will start immediately.
(6) Switch the pages for displaying shortcut keys.
(7) Change to normal mode.
(8) Shows the destination fax number.
(9) Setting keys that can be used for the fax.
(10) Displays the list of function keys. Frequently used
[Others] can be registered.
(11) Check the current settings.
(12) Displays the list of keys other than the function keys
indicated above.
► FUNCTIONS THAT CAN BE USED ON THE
MACHINE (page 24)
(13) Shows the amount of free memory available for fax
reception.
(14) Tap to dial in speaker mode.
(15) Enter the fax number.
(16) Displays the functions that can be utilized in the Fax
Mode.
(17) Searches for the address.
(18) Displays the address book.
CA
Preview
Start
Original
Address Fax Number
Address Book
Sending History
Direct Entry
Detail
8½x11
8½x11
100%
8½x11
Easy
Fax
Fax
(10) (11) (12) (13) (1)
(3)
(16)
(15)
(4)
(9)
(1)
(2)
(3)
(4) (5)
(6)
(7) (18) (8)(8)
(17)
(14) (5)
To select a function in easy mode
In "Settings", select [System Settings] → [Common
Settings] → [Operation Settings] → [Easy Mode
Settings] → [Easy Fax]
To Next Page
Loading...
