Sharp MX-B707F

Menu item Description
Screen Brightness
20–100% (90*)
Adjust the brightness of the display.
Flash Drive Access
Enabled*
Disabled
Enable access to the flash drive.
Allow Background Removal
O
On*
Specify whether background removal is allowed.
Allow Custom Job scans
O
On*
Specify whether the Custom Job Scanning setting appears for
copy, scan, and fax.
Note: This menu setting appears only when a hard disk is
installed.
One Page Flatbed Scanning
O*
On
Set the printer to scan any type of job involving the scanner
glass as a single page.
Note: The printer returns to the home screen after
performing a single flatbed scan instead of displaying
prompts.
Express Scanning
O*
On
Set the initial scanning speed point to the fastest speed.
Output Lighting
O
On*
Enable the integrated output light or indicator light of an
optional output bin.
Audio Feedback
Button Feedback (On*)
Volume (5*)
• Enable audio feedback for button presses, panel
interactions, paper loaded prompts, and error
notifications.
• Adjust the feedback volume.
Screen Timeout
5–300 seconds (60*)
Set the idle time before the display shows the home screen or
before the printer logs out a user account automatically.
Note: An asterisk (*) next to a value indicates the factory default setting.
Eco-Mode
Menu item Description
Print
Sides
1‑Sided*
2‑Sided
Specify whether to print on one side or two sides of the paper.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 62