Sharp MX-C300W Technical Handy Guide

SHARP
WIRELESS LAN SETUP
23
5. Under the connection type menu, select the preferred Wireless connection type (Wired, Wireless
(Infrastructure Mode) or Wired+Wireless AP (Access Point).
6. When prompted, power cycle the MFP device:-
7. Reopen the Network menu (Special Function - System Settings).
Note: Administrator login will be required.
8. Enter the required Wireless Settings for the specified Wireless Connection Type (Access Point
Mode or Infrastructure Mode) selected in Step 5:-
Note:
Detailed information regarding all Wireless Settings can be found on the following page:-
Network_______________________
Connection Type
Wired Settings
Wireless (Infrastructure)
Wireless (Access Point)
Network_______________________
Connection Type
Wired Settings
Wireless (Infrastructure)
Wireless (Access Point)
Wireless (Access Point)___________
Security Settings
Device IP Address Settings
Channel Settings
Setting of SSID
Please power the
switch off and on
again, to allow the
new setup to take
effect.

Sharp MX-C300W Specifications

General

Print Technology	Laser
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Print Resolution	600 x 600 dpi
Copy Speed (Black)	30 cpm
Copy Speed (Color)	30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Mobile Printing	Yes
Max Paper Size	8.5" x 14"
Connectivity	USB, Ethernet, Wireless
Display	4.3-inch color touchscreen
Weight	29 kg
Scan Type	Flatbed, ADF