Sharp MX-C300W Technical Handy Guide

SHARP
MX-C250F/300W FIRMWARE UPGRADE
29
MX-C250F, MX-C300W ONLY [USB MEMORY DEVICE]:
1. Using a PC, copy the MX-C250/300 series firmware (*.sfu) onto the root directory of a USB
memory device (as indicated below):-
2. Power ON the MX-C250/300 series machine.
3. Insert the USB memory device containing the firmware file into the front USB Port.
4. Enter Simulation 49-01.
Note: If no USB memory device is detected or the firmware file is not located on the root
directory, No File Detected will be displayed (as shown below):-
5. Using the UP & DOWN navigation keys on the operation panel, select the required firmware
file (*.sfu):-
6. The current and the updated firmware version will be shown within the display – press the OK
button or Copy START key to execute.

Sharp MX-C300W Specifications

General

Print Technology	Laser
Print Speed (Black)	30 ppm
Print Speed (Color)	30 ppm
Print Resolution	600 x 600 dpi
Copy Speed (Black)	30 cpm
Copy Speed (Color)	30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Duplex Printing	Yes
Mobile Printing	Yes
Max Paper Size	8.5" x 14"
Connectivity	USB, Ethernet, Wireless
Display	4.3-inch color touchscreen
Weight	29 kg
Scan Type	Flatbed, ADF