9
SPECIFICATIONS
Basic Specifications / Copier specifications
Model
MX-C301/MX-C301W
Type Desktop
Colour
Full colour
Copier system
Laser electrostatic copier
Scanning resolution
Scan: 600 × 600 dpi, 600 × 300 dpi
Print: 600 × 600 dpi, equivalent to 9,600 dpi × 600 dpi
Gradation
Scan: 256 levels / Print: equivalent to 256 levels
Original paper sizes Max. A4 (8-1/2”×11”) / sheets, bound documents
Copy sizes
A4 to A5 (8-1/2”×14” to 5-1/2” × 8-1/2”), Envelopes
Tray 1-2: A4, B5, A5, 8-1/2" × 11", 7-1/4" × 10-1/2", 5-1/2" × 8-1/2"
Multi-bypass tray: 216 mm × 356 mm (8-1/2” × 14”) to
A6, Envelopes, Custom
Lost margin
Leading edge: 4 mm ± 1 mm (11/64” ± 3/64”)
Leading margin/Trailing dege: total 8 mm (21/64”) or less
Left edge / Right edge: total 8 mm (21/64”) or less
Paper type
Tray 1-2: Plain paper
Multi-bypass tray: Plain paper, Heavy paper, Thin
paper, Special paper (Envelopes, Label, Glossy paper,
Transparency film)
Warm-up time
18 seconds
This may vary depending on the ambient conditions.
First-copy time
Colour: 7.4 seconds B/W: 6.3 seconds
This may vary depending on the state of the machine.
Portrait feeding of A4 (8-1/2” x 11”) sheets.
Continuous copying
speeds*
30 copies/min.
* Continuous speed for same original source. Output may
be temporarily interrupted to stabilize image quality.
Copy ratios
Same size: 1:1 ± 0.8 %
Enlarge: 115 %, 122 %, 141 %, 200 %
Reduce: 50 %, 70 %, 81 %, 86 %
Zoom range: 25 to 400 % (25 - 200 % using RSPF) in
1 % increments, total 376 increments.
Paper feed / capacity
250 sheets in one tray plus 50-sheet multi-bypass tray
Using 80 g/m
2
(21 lbs.) weight paper
Max. paper feed /
max. capacity
750 sheets in 2 trays plus 50-sheet multi-bypass tray
Using 80 g/m
2
(21 lbs.) weight paper
Continuous copy
Max. 999 copies
Memory
Standard: 3 GB HDD: 250 GB
1 GB = One billion bytes when referring to hard drive
apacity. Actual format capacity is less.
Ambient environment
Operating
environment
10 °C (54 °F) to 35 °C (91 °F)
(20 % to 85 % RH) 590 - 1,013 hpa
Standard
environment
20 °C (68 °F) to 25 °C (77 °F)
(65 ± 5 % RH)
Required power supply
Local voltage ± 10 % (For the power supply requirements,
see the name plate on the left side of the machine.)
Power consumption Max. 1.25 kW
(including options such as the desk)
Dimensions
429 mm (W) × 569 mm (D) × 474 mm (H)
(16-57/64” (W) × 22-13/32” (D) × 18-43/64” (H))
Weight
MX-C301: Approx. 32.5 kg (72 lbs.)
MX-C301W: Approx. 33.0 kg (73 lbs.)
Overall dimensions
663 mm (W) × 577 mm (D) (26-7/64” (W) × 22-23/32” (D))
(With multi-bypass tray and output tray extension
extended, also with operation panel tilted at the
maximum angle)
Document feeder types
Reversing Single Pass Feeder (RSPF)
Original paper sizes
A4 to A5 (8-1/2” × 14” to 5-1/2” × 8-1/2”),
Business card (51 × 89 mm to 55 × 91 mm
(2” × 3-1/2” to 2-1/6” × 3-19/32”))
Original paper types
50 g/m
2
(13 lbs. bond) to 105 g/m
2
(28 lbs. bond)
Paper storage capacity
50 sheets (80 g/m
2
(21 lbs.))
Business card: up to 25 sheets (0.2mm (0.008”)
thickness) or maximum 6.5mm (0.266”) stacking
height
Scan speed (copy)
35 one-sided sheets/minute (A4, 600 × 300 dpi)
Automatic document feeder
Model
MX-C301W
Useable lines
General phone lines (PSTN), automated branch exchange (PBX)
Connection speed
Super G3: 2.4 to 33.6 kbps Auto fallback,
G3: 2.4 to 14.4 kbps Auto fallback
Coding method MH, MR, MMR, JBIG
Connection mode
Super G3 / G3
Original paper sizes
for transmission
A4 (8-1/2" × 11") (Paper with a max. length of 500 mm
can be transmitted (one-sided only).)
Registered paper size
A4, B5, A5, 8-1/2" × 11", 7-1/4" × 10-1/2", 5-1/2" × 8-1/2"
Transmission time
Approx. 2 seconds * (A4 (8-1/2" × 11") Sharp standard
paper, normal characters, Super G3 (JBIG))
Memory
1GB
Notes
Touch dial memory Max. 1,000 entries (Including
group dialing for fax, scanner,
and Internet fax)
Group dial Max. of 500 entries
Mass transmissions Max. of 500 recipients
* Complies with the 33.6 kbps transmission method for Super G3 facsimiles
standardized by the International Telecommunications Union (ITU-T). This
is the speed for when sending an A4 (8-1/2" × 11") size piece of paper
of around 700 characters at standard image quality (8 × 3.85 line/mm)
in Hi-speed mode (33.6 kbps). This is the transmission speed for image
information only and does not include time for transmission control. The
actual time needed for a transmission depends on the content of the text,
type of receiving fax machine, and telephone line conditions.
Fax Specifications
Continuous print speed
Same as continuous copy speed
Resolution
Data processing: 600 × 600 dpi
Print: 600 × 600 dpi, equivalent to 9600 × 600 dpi
Page description language
Standard: PCL6 emulation, PS3 emulation
Options: XPS*
Compatible protocols
TCP/IP (IPv4/IPv6), IPX/SPX, EtherTalk
Compatible OS
Windows XP, Windows Server 2003, Windows Vista,
Windows Server 2008, Windows 7, Windows 8,
Windows Server 2012
Macintosh (Mac OS X 10.4, 10.5, 10.6, 10.7, 10.8, 10.9)
Internal fonts (options)
80 fonts for PCL, 136 fonts for PS3 emulation
Interface
10BASE-T/100BASE-TX/1000BASE-T,
USB 2.0 (high speed mode)
* XPS stands for XML Paper Specification. When equipped with the XPS
expansion kit (MX-PUX1).
Network Printer Specifications
Model
500-sheet paper feed unit (MX-CS11)
Paper sizes
A4, B5, A5, 8-1/2" × 11", 7-1/4" × 10-1/2", 5-1/2" × 8-1/2"
Useable paper
60 g/m
2
(16 lbs. bond) to 105 g/m
2
(28 lbs. bond)
Paper capacity
500 sheets Using 80 g/m
2
(21 lbs.) weight paper
Dimensions
427 mm (W) × 505 mm (D) × 151 mm (H)
(16-13/16" (W) × 19-57/64" (D) × 5-61/64" (H))
Weight
Approx. 5 kg (11.1 lbs.)
Drawer (Optional)
To Next Page
Loading...
Need help?
General
