22
BEFORE USING THE MACHINE
Load paper more than 8-1/2" x 11" size
When setting 8-1/2" x 11" size paper, remove the 2 regulation
plates with green colour on the front and back side of the tray
before setting the paper. The plates are contained in the
inside storage space of the back side of the tray.
When loading 8-1/2" x 14" paper, remove divider plate A.
Move divider plate A all the way to the paper feed opening
(right side), and pull up.
If the machine does not recognize the paper size even though
8-1/2" x 14" size is correctly loaded, check if the holder is
positioned at 8-1/2" x 14”.
Regulation plate Storage space
To Next Page
Loading...
Need help?
General
