SPECIFICATIONS
Machine specifications
Name
Digital Full Color Multifunctional System
MX-C312
Type Desktop
Required power supply AC 120V ± 10% 60Hz
Power consumption 1.44 kW
Dimensions
22-3/64" (W) x 19-13/32" (D) x 28-7/64" (H)
(560 mm (W) x 493 mm (D) x 714 mm (H))
Weight Approx. 101.4 lbs. (46 k
g
)
Overall dimensions
34-11/64" (W) x 19-13/32" (D) (868 mm (W) x 493 mm (D))
(when bypass tray is extended)
Ambient environment
10 °C (54 °F) to 35 °C (91 °F) (20 % to 60 % RH)
10 °C (54 °F) to 30 °C (86 °F) (85 % RH)
500-Sheet paper feed unit specifications
Model MX-CSX1 (tray 2) MX-CSX2 (tray 3, tray 4)
Power supply Supplied from the machine
Dimensions
21-1/16" (W) x 17-1/4" (D) x
4-13/32" (H)
(535 mm (W) x 438 mm (D) x
112 mm (H))
(not including adjuster)
21-1/16" (W) x 17-1/4" (D) x
4-21/64" (H)
(535 mm (W) x 438 mm (D) x 110
mm (H))
(not including adjuster)
Weight Approx. 15.0 lbs. (6.8 k
g
) Approx. 12.3 lbs. (5.6 k
g
)
Finisher specifications
Model MX-FN12
Power supply Supplied from the machine
Dimensions
When tray is folded up:
18-45/64" (W) x 13-7/64" (D) x 6-7/32" (H)
(475 mm (W) x 333 mm (D) x 158 mm (H))
When tray is extended:
20-19/32" (W) x 13-7/64" (D) x 6-7/32" (H)
(523 mm (W) x 333 mm (D) x 158 mm (H))
Weight Approx. 19.8 lbs. (9 k
g
)
Stapler section
Allowed paper sizes
for stapling
8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5", 8-1/2" x 13",
8-1/2" x 11", 7-1/4" x 10-1/2", A4, B5, 16K
(Stapling at one position at front of paper.)
Maximum number of
sheets for stapling*
1
30 sheets
*1 The maximum number of sheets for stapling assumes a paper weight of
24 lbs. (90
g
/m
2
) and includes two cover sheets of 28 lbs. bond to 110
lbs. index (106
g
/m
2
to 209
g
/m
2
).
Facsimile specifications
Model MX-FXX3
Applicable telephone line Public switched telephone network, PBX
Scanning resolution
(supports ITU-T
standards)
8 x 3.85 lines/mm (Standard), 8 x 7.7 lines/mm (Fine,
Fine-Halftone), 8 x 15.4 lines/mm (Super Fine, Super
Fine - Halftone), 16 x 15.4 lines/mm (Ultra Fine, Ultra
Fine - Halftone)
Transmission speed 33.6 kbps down to 2.4 kbps Automatic fallback
Compression method MH / MR / MMR / JBIG
Transmission modes
Super G3, G3 (the machine can only send faxes to and
receive faxes from machines that support G3 or Super
G3)
Paper sizes
8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11",
5-1/2" x 8-1/2" (A4, B5, A5)
Power supply Supplied with the machine
Noise emission values
The following shows noise emission values as measured according to
ISO7779.
Sound power level L
WAd
Printing mode (continuous printing) 7.4 B
Standby mode (Low power level mode) -
Sound pressure level L
pAm
(actual measurement)
Printing mode
(continuous printing)
Bystander positions 56dB
Standby mode Bystander positions 31dB
Operating: with options MX-CSX1+MX-CSX2(x 2)+MX-DS13
Standby: "-" = less than background noise.
TO THE ADMINISTRATOR OF THE MACHINE
Factory default passwords
When accessing the system settings, the administrator password is required
to log in with administrator rights. The system settings can be configured
in the Web pages as well as on the operation panel. To access the system
settings using the Web pages, a password is also required.
Factory default administrator password
Factory default setting: admin
Store a new administrator password as soon as the machine is installed.
Once the administrator password has been changed, the new password is
required to restore the factory default password. Take care to remember the
new password.
Factory default passwords (Web pages)
There are two factory default accounts: "Administrator" and "User". A person
who logs in as an "Administrator" can configure all settings in the Web
pages. In addition, an administrator can restrict access to other settings by
enabling "User" accounts.
The factory default passwords are shown below.
Factory default account Factory default password
User users users
Administrator admin admin
Forwarding all transmitted and received data to the
administrator (document administration function)
This function is used to forward all data transmitted and received by the
machine to a specified destination (Scan to E-mail address, Scan to FTP
destination, Scan to Network Folder destination, or Scan to Desktop
destination).
This function can be used by the administrator of the machine to archive all
transmitted and received data.
To configure the document administration settings, click [Application
Settings] and then [Document Administration Function] in the Web page
menu.
(Administrator rights are required.)
Note:
The format, exposure, and resolution settings of transmitted and
received data remain in effect when the data is forwarded.
When forwarding is enabled for data sent in fax mode,
The [Direct TX] key does not appear in the touch panel.
Quick online transmission and dialing using the speaker cannot be
used.
TO ENSURE SAFE USE OF THE MACHINE
Cautions
Do not make any modifications to this machine. Doing so may result in
personal injury or damage to the machine.
Do not make copies of anything which is prohibited from copying by law.
The following items are normally prohibited from printing by national law.
Other items may be prohibited by local law.
Do not use a flammable spray to clean the machine. If gas from the
spray comes in contact with hot electrical components or the fusing unit
inside the machine, fire or electrical shock may result.
Do not place a vessel that contains water or other liquid on the machine.
Do not place metal objects on the machine that may fall into the
machine.
In the event that a metal object falls or liquid spills into the machine, first
cord.
unplug the power cord in order to prevent electrical shock and fire due to
a lightning strike.
If you find that condensation has formed on the surface of the machine
or the display, open the right cover and check for condensation inside
the machine.
If condensation has formed inside the machine, turn off the main power.
Turning on the main power when condensation has formed inside
the machine may cause a failure. Leave the right cover open until the
condensation evaporates naturally.
To keep foreign matter from getting on the primary transfer belt unit or
secondary transfer roller unit while the right cover is open, place a cover
over the opening.
Do not plug in or unplug the power cord with a wet hand.
DIGITAL FULL COLOR MULTIFUNCTIONAL SYSTEM
MODEL: MX-C312
Start Guide
TURNING THE POWER ON
22
11
OPERATION MANUALS AND HOW TO USE THEM
A printed manual and a manual in PDF format are provided with the machine. Read Start Guide (this manual) before using the machine for the first time.
For detailed explanations of the machine, refer to the Operation Guide (PDF format).
To view the Operation Guide in PDF format, Adobe
®
Reader
TM
or Acrobat
®
Reader of Adobe Systems Incorporated is required.
The programs can be downloaded from the following URL:
http://www.adobe.com/
DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM
MODEL: MX-C312
Start Guide
TURNING THE POWER ON
22
11
OPEARTION MAMUALS AND HOW TO HSE THEM
A printed manual and a manual in PDF format are provided with the machine. Read Start Guide (this manual) before using the machine for the first time.
For detailed explanations of the machine, refer to the Operation Guide (PDF format).
To view the Operation Guide in PDF format, Adobe
®
Reader
TM
or Acrobat
®
Reader of Adobe Systems Incorporated is required.
If neither program is installed on your computer, the programs
can be downloaded from the following URL:
http://www.adobe.com/
DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM
Start Guide
TURNING THE POWER ON AND OFF
The machine has two power switches. One is the main power switch on the
left side of the machine, and the other is the [POWER] key (
) on the upper
right side of the operation panel.Intended use
Turning on the power
(1) Switch the main power switch to the "on" position.
(2) Press the [POWER] key (
) to turn on the power.
Turning off the power
(1) Press the [POWER] key ( ) to turn off the power.
(2) Switch the main power switch to the "off" position.
Important rules when turning off the main power
When turning off the main power, always turn off the operation panel
power first, wait at least 20 seconds, and then turn off the main power.
If you turn off the main power without turning off the operation panel power,
or do not wait at least 20 seconds before turning off the main power, machine
failure may result.
Ifthemainpowerissuddenlyinterruptedduetoapowerfailureorother
Manuals in PDF format
Detailed explanations of the functions that can be used on the machine are
provided in the Operation Guide in PDF format. The Operation Guide can be
downloaded from the Web pages in the machine.
*To view the Operation Guide in PDF format, Adobe
®
ReaderTM or
Acrobat
®
Reader of Adobe Systems Incorporated is required. If neither
program is installed on your computer, the programs can be downloaded
from the following URL:
http://www.adobe.com/
ACCESSING THE WEB SERVER IN THE
MACHINE
When the machine is connected to a network, the machine's built-in Web
servercanbeaccessedfromaWebbrowseronyourcomputer
Operation Guide
Download the Operation Guide from
the Web pages in the machine.
For the downloading procedure, see
"Downloading the Operation Guide".
Convenient methods for using the Operation Guide
The first page contains a regular table of contents as well as an "I want to..." table
of contents.
"I want to..." lets you jump to an explanation based on what you want to do. For
example, "I use the copier function often, so I'd like to save paper".
Use either table of contents as appropriate based on what you want to know.
The contents of the Operation Guide are as follows:
BEFORE USING THE MACHINE
COPIER
PRINTER
FACSIMILE
SCANNER / INTERNET FAX
DOCUMENT FILING
SYSTEM SETTINGS
TROUBLESHOOTING
MODEL: MX-C312
Main power switch
When the main power switch is switched
on, the main power indicator on the
operation panel lights up.
[POWER] key
Main power indicator
[POWER] key
"On" position
"Off" position
Start Guide (this manual) Operation Guide (PDF)
Operation Guide can be downloaded from the Web pages in the machine.
Checking the IP address
SYSTEM
SETTINGS
First, press the [SYSTEM
SETTINGS] key on the
touch panel.
(1) Touch to enter [List Print (User)] settings.
System Settings
Admin Password Exit
Total Count
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
Address Control
Fax Data
Receive/Forward
USB-Device Check
Default Settings
List Print
(User)
(1)
(2) Touch to print the user list.
The IP address is shown in the list.
Print
Print
Print
Print
System Settings
List Print (User)
All Custom Setting List:
Sending Address List:
Printer Test Page:
Document Filling Folder List:
PCL Symbol Set List
Individual List
Back
(2)
Accessing the Web server in the
machine
Confirm that the machine and your
computer are connected to the same
network and follow the procedures below.
(1) Input the IP address of the machine.
(1)
Recommended Web browsers
AInternet Explorer: 6.0 or higher
(Windows
®
)
ANetscape Navigator: 9 (Windows
®
)
AFirefox: 2.0 or higher (Windows
®
)
ASafari: 1.5 or higher (Macintosh)
Ask the administrator of the machine to
obtain the account information necessary
for ventification.
Downloading the operation
guide
(1) Click in the menu of the Web page.
(1)
(2) Select language.
(2)
(3) Click to start download.
(3)
Downloading the operation guide
(1)Switch the main power switch to the "on" position.
(2)Press the [POWER] key (
) to turn on the power.
To turn the power off, perform the step (2), then step (1). In step (1), switch
the main power switch to the “off” position.
Main power switch
Main power indicator
"On" position
Lights up when the main power switch is on.
"Off" position
[POWER] key
Important rules when turning off the main power
When turning off the main power, always turn off the operation
panel power first, wait at least 20 seconds, and then turn off
the main power.
If you turn off the main power without turning off the operation panel
power, or do not wait at least 20 seconds before turning off the
main power, machine failure may result.
If the main power is suddenly interrupted due to a power failure or
other reason, turn the machine power back on and then turn it off
correctly as described below.
Start Guide (this manual) Operation Guide (PDF)
Operation Guide can be downloaded from the Web pages in the machine.
Checking the IP address
SYSTEM
SETTINGS
First, press the [SYSTEM
SETTINGS] key on the
touch panel.
(1) Touch to select [List Print (User)] settings.
System Settings
Admin Password
Exit
Total Count
Paper Tray
Settings
Printer Condition
Settings
Document Filing
Control
Address Control
Fax Data
Receive/Forward
USB-Device Check
Default Settings
List Print
(User)
(1)
(2) Touch to print the user list.
The IP address is shown in the list.
Print
Print
Print
Print
System Settings
List Print (User)
All Custom Setting List:
Sending Address List:
Printer Test Page:
Document Filling Folder List:
PCL Symbol Set List
Individual List
Back
(2)
Accessing the Web server in the
machine
Confirm that the machine and your
computer are connected to the same
network and follow the procedures below.
(1) Enter the IP address of the machine.
(1)
Recommended Web browsers
Internet Explorer: 6.0 or higher
(Windows
®
)
Netscape Navigator: 9 (Windows
®
)
Firefox: 2.0 or higher (Windows
®
)
Safari: 1.5 or higher (Macintosh)
Ask the administrator of the machine to
obtain the account information if necessary.
Downloading the operation
guide
(1) Click in the menu of the Web page.
(1)
(2) Select language.
¨²©
(3) Click to start download.
(3)
PRINTED IN CHINA
2012G YT1
TINSE5086FCZZ
Downloading the Operation Guide
(1) Switch the main power switch to the "on" position.
(2) Press the [POWER] key (
) to turn on the power.
To turn the power off, perform the step (2), then step (1). In step (1), switch
the main power switch to the "off" position.
Main power switch
Main power indicator
"On" position
Lights up when the main power switch is on.
"Off" position
[POWER] key
Important rules when turning off the main power
When turning off the main power, always turn off the operation
panel power first, wait at least 20 seconds, and then turn off
the main power.
If you turn off the main power without turning off the operation panel
power, or do not wait at least 20 seconds before turning off the
main power, machine failure may result.
If the main power is suddenly interrupted due to a power failure or
other reason, turn the machine power back on and then turn it off
correctly.
To Next Page
Need help?
Power
Copying Features
Weight and Dimensions
