Sharp MX-C507P - Page 105

5028
Marks on leading or trailing edges check
RFID tag silhouette on prints check
Diagnostics and troubleshooting
71
Action
Yes
No
Step 1
Check the leading and trailing edges of the printout for marks.
Does the printout have marks on the leading or trailing edges?
Go to step 2.
Go to another print
quality check.
Step 2
a Use a dry and lint-free cloth to clean the ribs (A) on the transfer
module cleaning assembly housing.
Note: Do not remove the transfer belt to clean the housing.
A
b Use a toner vacuum to remove the remaining toner.
c Perform a print job.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.