Sharp MX-C507P - Noise emission levels; Waste from Electrical and Electronic Equipment (WEEE) directive

5028
Diagnostics and troubleshooting
136
Action
Yes
No
Step 5
Check the paper path exiting the tray.
Is the paper path free of fragments and contamination?
Go to step 7.
Go to step 6.
Step 6
Clean the paper path.
Does the problem remain?
Go to step 7.
The problem is
solved.
Step 7
a Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Motor tests > Pick (tray
1)
b Select a setting, and then touch Start .
Does the motor run?
Contact the next
level of support.
Go to step 8.
Step 8
Check the motor cable for proper connection and damage, and
replace if necessary.
Does the problem remain?
Go to step 9.
The problem is
solved.
Step 9
a Replace the motor (tray 1 pick).
b Perform a print job.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.