Sharp MX-C507P - Page 172

5028
Diagnostics and troubleshooting
138
Action
Yes
No
Step 2
a Remove the tray empty sensor actuator. See “550-sheet tray
empty sensor actuator removal” on page 424 .
b Reseat the spring (B) on the flag as shown.
B
c Reinstall the flag.
d Reseat the media feeder. See “Media feeder removal” on
page 411 .
e Press the media feeder actuator (C), and then check if the flag
drops.
C
Did the flag drop?
Go to step 4.
Go to step 3.