Sharp MX-C507P - Page 260

5028
Motor (tray [x] transport) failure service check
Diagnostics and troubleshooting
226
Action
Yes
No
Step 1
Reset the printer
Does the problem remain?
Go to step 2.
The problem is
solved.
Step 2
Check the connections between the motor (tray [x] transport) and
controller board.
Is the motor properly connected?
Go to step 4.
Go to step 3.
Step 3
Reseat the cable.
Does the problem remain?
Go to step 4.
The problem is
solved.
Step 4
Check the motor (tray [x] transport) cable for damage.
Is the cable free of damage?
Go to step 6.
Go to step 5.
Step 5
Replace the cable.
Does the problem remain?
Go to step 6.
The problem is
solved.
Step 6
Reset the printer.
Does the problem remain?
Go to step 7.
The problem is
solved.
Step 7
Replace the motor (tray [x] transport).
Does the problem remain?
Go to step 8.
The problem is
solved.
Step 8
Reset the printer.
Does the problem remain?
Go to step 9.
The problem is
solved.
Step 9
Replace the controller board.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.