MX-C507P [4] REPLACING PARTS AND SUPPLIES 4-9
3. Remove t
he fuser.
4. Unpack t
he new fuser.
5. Insert the new fuser.
6. Close door
s D and A.
7. Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to
an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
8. Reset the fuser maintenance counter.
For more information, see Resetting the maintenance counter
.
To Next Page
Loading...
