MX-C507P [4] REPLACING PARTS AND SUPPLIES 4-17
10. Insert the imaging kit.
11. Insert the waste toner bottle.
12. Close door
B.
13. Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to
an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
14. Reset the maintenance counter. For more information, see Resetting the maintenance counter
.
Resetting the maintenance counter
1. From the home screen, touch Settings >Device >Maintenance >Configuration Menu >Supply Usage And
Counters.
2. Select Fuser Reset or ITM Reset.
To Next Page
Loading...
